Free Academic Seminars And Projects Reports

Full Version: Free Piston Engine
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2
Free Piston Enqines: Thermoucoustic Stirling Engine
Free Piston Stirling Engine
Free Piston Enqines: Thermoucoustic Stirlinq Enqine
ABSTRACT
The International Academy of Engineering convened an expert panel to select the technologically outstanding achievements of the 2O century & its no surprise that the I.C. Engine Technology topped the list. But, Pollution concerns, global warming and shrinking fossil fuel reserves have focused world attention on how engines generate electrical and mechanical power in a better way.
The free piston engine is an attempt to combine the high thermal efficiency of a reciprocating engine with high power/weight ratio of a rotary turbine. It is a combination of a reciprocating engine and a rotary turbine.
The quest for increased power from a given cylinder size has resulted in a long process of development. Important steps in this process of development are improvements in the fuels used and in the design of various components for higher efficiencies and lower cost and weight. However, a different approach in the direction of using different cycles of operation or modifications of existing cycle, has also been pursued with great interest.
In a step towards exploiting existing power cycles, scientists at the U.S Department of Energy s Los Alamos National Laboratory have developed a remarkably simple, energy-efficient engine which works on Stirling Cycle and has no oscillating pistons, oil seals or lubricants, known as the
Thermoacoustic Stirling Engine.
Sound waves in thermoacoustic engines can replace the pistons and cranks that are typically built into conventional engines & hence in true sense thermoacoustic stirling engine can be termed as advancement in free piston engines.
Free Piston Enqiries: Thermoucoustic Stirlinq Enqine :2
CoNvrnoN STIRLING CYcLE
Basic Stirling Cycle:
Stirling Engine, type of engine that derives mechanical power from the expansion of a confined gas at a high temperature. The stirling cycle [Fig. 1] was patented in 1816 by the Scottish clergyman Robert Stirling and was used as a small power source in many industries during the 19th and early 20th centuries. The need for automobile engines with low emission of toxic gases has revived interest in the Stirling engine, and prototypes have been built with up to 500 horsepower and with efficiencies of 30 to 45 percent.
The cycle that provides the work is called the Stirling cycle; it consists in its simplest form of the compression of a fixed amount of so-called working gas (hydrogen or helium) in a cool chamber. This cool compressed gas is transferred to a hot chamber, which is heated by an external burner, where the gas expands and drives a piston that delivers the work. The expanded hot gas is then cooled and returned to the cold chamber, and the cycle begins again. Stirling also conceived the idea of a regenerator (a solid with many holes running through it, which he called the economiser) to store thermal energy during part of the cycle and return it later [Fig. 2]
The engine is able to transform heat into work because the expansion of
the gas at high temperature delivers more work than is required to compress the same amount of gas at low temperature.
The heat for the expansion chamber is provided by an external continuous burner that can operate on gasoline, alcohol, natural gas, propane, butane, or solar energy and the exhaust generated has very low free carbon and toxic gas levels. The Stirling engine runs smoothly because pressure variations in the compression and expansion chambers are sinusoidal, that is, relatively gradual, rather than explosive as in internal-combustion cycles.
Free Piston Engines: Thermocicoustic Stirling Engine :3
Stirling engines are unique heat engines because their theoretical efficiency is nearly equal to their theoretical maximum efficiency, known as the Carnot Cycle efficiency.
Figure 1: PV & TS Representation Of Stirling Cycle
Figure 2: Stirling Cycle
Free Piston Enqines: Thermoucoustic Stirlinq Enqine :4
WHAT IS TURMOACOUSTICS?
Thermoacoustics is the study of the thermoacoustic effect and the attempt to harness the effect as a useful heat engine. A thermoacoustic prime mover uses heat to create sound. Simply put, thermoacoustic effect is the conversion of heat energy to sound energy or vice versa. Utilizing the Thermoacoustic effect, engines & refrigerators are developed that use heat as an energy source and have no moving parts!
Transformation of Heat Energy into intense Acoustic Energy:
Thermoacoustic device [Fig. 3] consists, in essence, of a gas-filled tube containing a stack (top), a porous solid with many open channels through which the gas can pass. Resonating sound waves (created, for example, by a loudspeaker) force gas to move back and forth through openings in the stack.
If the temperature difference along the stack is made sufficiently large, sound can compress and warm a parcel of gas (a), but it remains cooler than the stack and thus absorbs heat. When this gas shifts to the other side and expands (b), it cools but stays hotter than the stack and thus releases heat. Hence, the parcel thermally expands at high pressure and contracts at low pressure, which amplifies the pressure oscillations of the reverberating sound waves, transforming heat energy into acoustic energy. A device that creates sound from heat is called a thermoacoustic heat engine.
Free Piston Enqines: Thermoucoustic Stirlinq Enqine :5
THERMOACOUSTIC STIRLING ENGINE (ASHE)
Introduction:
The thermoacoustic Stirling heat engine [Fig. 4 & 5] developed by the LANL scientist s converts heat to intense acoustic power in a simple device that comprises only pipes and conventional heat exchangers and has no moving parts. The acoustic power can be used directly in acoustic refrigerators or pulse- tube refrigerators to provide heat-driven refrigeration, or it can be used to generate electricity via a linear alternator or other electroacoustic power transducer. Already the engine s 30% efficiency and high reliability may make medium-sized natural-gas liquefaction plants (with a capacity of up to a million gallons per day) and residential cogeneration economically feasible.
Figure 3: Working Principle of a Thermoacoustic device
Free Piston Enqines: Thermoucoustic Stirlinq Enqine :6
The power production process is environmentally friendly and up to 30 percent efficient while typical internal combustion engines are 25 to 40 percent efficient.
Because the thermoacoustic Stirling heat engine contains no moving parts and is constructed of common materials, it requires little or no maintenance, can be manufactured inexpensively, and is expected to have many future uses
Figure 4: Thermoacoustic Stirling Engine (TASHE)
Figure 5: Thermoacoustic Stirling Engine (TASHE)
Free Piston Enqiries: Thermoucoustic Stirlinq Enqine :7
APPARAT1.Js
Scaled drawing of the TASHE, used in the measurements is shown in Figure 6. Essentially, it is composed of a 1/4-wavelength resonator filled with 30- bar helium. The torus-shaped section contains the heat exchangers, regenerator and other duct work necessary to force the he-hum to execute the Stirling cycle. The rest of the hardware past the resonator junction forms the resonator and variable acoustic load.
Loud Speaker: It is used to generate sound waves in the resonator tube.
Cold Heat exchanger: It is a simple shell & tube type heat exchanger with tubes arranged in parallel to acoustic displacement.
Regenerator: The regenerator is a mesh of fine wires or sintered metal structure sealed within the tube The function of the regenerator is to abstract and hold heat from working gas flowing from hot space to cold space and return it back to working gas flowing from cold space to hot space thus increasing thermal efficiency.
Hot Heat exchanger: It is similar in construction to the cold heat exchanger. Its location is chosen so as to not disturb the flow in the thermal buffer tube.
Thermal buffer tube: The thermal buffer tube (TBT) is a tapered tube & provides a thermal buffer between the hot heat exchanger and room temperature.
Flow Straightener: It ensures that the flow entering the bottom of the TBT is spatially uniform, not a jet flow due either to the geometry of the secondary cold heat exchanger or to flow separation at the resonator junction.
Clockwise farther around the torus are the resonator junction, feedback inertance, and comjliance. The inertance and compliance provided by these components act (respectively) like inductance and capacitance in an analogous electrical circuit (bottom), which introduce phase shifts (between voltage and current in an electrical network and between gas pressure and velocity in an acoustic network). Although pressure and gas velocity are 90 degrees out of phase within the main standing-wave resonator
Free Piston Enqines: Thermoucoustic Stirlinq Enqine :8
Jet Pump: It is used to stop streaming problems known as gudgeon streaming.
Acoustic Load: Here the sound energy is converted to useful work.
a
Resonator
Main cold heat Zexchanger (Or)
f Regenerator
Hot heat exchanger (h)
E Thermal buffer tube (TBT)
Secondary cold heat
V exchanger and flow
Straightener
-
Vaijable acoustic load
b
CompIance
/7/ pump
Feedback inertance Resonator junct ion
20cm
I
Figure 6: Apparatus of TASHE
Free Piston Enqines: Thermoucoustic Stirlinq Enqine :9
How DO ThS MACHINES WORK?
In a nutshell, a thermoacoustic engine converts heat from a high- temperature source into acoustic power while rejecting waste heat to a low- temperature sink. A thermoacoustic refrigerator does the opposite, using acoustic power to pump heat from a cool source to a hot sink. Thermoacoustic Stirling engine designed at Los Alamos National Laboratory (top) weighs 200 kilograms and measures 3.5 meters long. The regenerator (middle, dark red) sits in one of two channels that connect the main helium-filled resonator with a compliance volume (dark blue); the other connection is through a narrow pipe, or inertance tube (dark green). The inertance and compliance provided by these components act (respectively) like inductance and capacitance in an analogous electrical circuit (bottom), which introduce phase shifts (between voltage and current in an electrical network and between gas pressure and velocity in an acoustic network). The phase shift created by the inertance-compliance network at the left creates a small pressure difference across the regenerator, driving gas through it. This flow increases and decreases in phase with the rise and fall of pressure in the main resonator. These conditions ensure that the regenerator provides more gain than loss, thus amplifying the acoustic oscillations within the engine [Fig. 7a]
The thermal energy injected at the hot end of the regenerator is transformed efficiently into acoustic energy, which can be used, for example, to drive a reciprocating electric generator or to power a refrigerator. One such device under development for commercial application is intended to liquefy natural gas. These devices perlorm best when they employ noble gases as their thermodynamic working fluids. Unlike the chemicals used in refrigeration over the years, such gases are both nontoxic and environmentally benign. Another appealing feature of thermoacoustics is that one can easily flange an engine onto a refrigerator, creating a heat-powered cooler with no moving parts at all.
Free Piston Engines: Thermocicoustic Stirling Engine :16
The sound levels generated in such devices, using specialised speakers, are extreme:
in one case the levels reach 190 dB, about 10 million times as intense as the front row levels at a rock concert and 300 times the intensity needed to ignite human hair. However, the sound levels outside the rigid pressure vessel are acceptable. They are not noisy because the casing is a quarter of an inch thick. You hear only a low frequency hum. A prototype refrigerator has already been built and uses sound to pump heat from a lower temperature to a higher. The engine has an efficiency of 30 per cent, which is comparable with that of a car engine (25-40 per cent).
So far, most machines of this variety reside in laboratories. But prototype thermoacoustic refrigerators have operated on the Space Shuttle and aboard a Navy warship. And a powerlul thermoacoustic engine has recently demonstrated its ability to liquefy natural gas on a commercial scale.
Figure 7a: Apparatus of TASHE
Figure 7b: Equivalent electrical Circuit
Free Piston Enqines: Thermoucoustic Stirlinq Enqine :11
Electrical Analogy:
The pressure and velocity of acoustic waves in a gas have rough
analogies in AC electric circuits: The pressure resembles the voltage, and the velocity the current [Fig. 7b]
The regenerator produces an amount of acoustic power that is proportional to the product of the oscillating pressure of the gas and the oscillating velocity of the gas. The power wasted in the regenerator is proportional to the square of the oscillating velocity. This loss is analogous to the power dissipated in an electrical resistor, which is proportional to the square of the current that flows through it.
Faced with such losses say, from the resistance of the wires in a transmission line electrical engineers long ago found an easy solution: Increase the voltage and diminish the current so that their product (which equals the power transferred) remains constant. So if the oscillatory pressure could be made very large and the flow velocity made very small, in a way that preserved their product, we could boost the efficiency of the regenerator without reducing the power it could produce.
Traveling acoustic waves, in contrast, have their pressure and velocity in phase with each other. Peter Ceperley of George Mason University noted 20 years ago that when traveling waves pass through a regenerator, the thermodynamic cycle of compression, heating, expansion, and cooling that the gas undergoes is the same as in a Stirling engine, where mechanical pistons establish the proper phasing of the gas motion. With gas velocity and pressure in phase, a traveling wave acoustic engine can use a reversible, much more efficient heat transfer process. Viscous dissipation and other losses have plagued the experimental implementation of traveling wave engines, and the high expectations for these engines are only now beginning to be realized.
THERMOACOUSTIC MAGNFrOHYDRODYNAMIC ELECFRIC GNRAThR:
Free Piston Enqines: Thermoucoustic Stirlinq Enqine :12
The intense acoustic energy generated in the resonator of thermoacoustic Stirling engine is fed to the Thermoacoustic electric generator which acts as the acoustic load. A thermoacoustic magnetohydrodynamic electrical generator comprises of a magnet having a magnetic field, an elongated hollow housing containing an electrically conductive liquid and a thermoacoustic structure positioned in said liquid, heat exchange means thermally connected to said thermoacoustic structure for inducing said liquid to oscillate at an acoustic resonant frequency within said housing, said housing being positioned in said magnetic field and oriented such that the direction of said magnetic field and the direction of oscillatory motion of said liquid are substantially orthogonal to one another, first and second electrical conductor means connected to said liquid on opposite sides of said housing along an axis which is substantially orthogonal to both the direction of said magnetic field and the direction of oscillatory motion of said liquid, whereby an alternating current output signal is generated in said conductor means at a frequency corresponding to the frequency of said oscillatory motion of said liquid.
Ass r & LIcNsEs
The thermo-acoustic technology development was led by the Los Alamos National Laboratory s Material Science Technology Division. Praxair, Inc. has acquired the assets and licenses to acoustic heat engines and acoustic refrigerators. Assets acquired by Praxair include pilot plants, commercial demonstration equipment, exclusive patent rights, licenses and development programs. The prototype demonstration and validation previously was conducted by Chart Industries. Praxair will continue to work with these agencies to commercialize thermo-acoustic technology.
CONCLUSION
Free Piston Enqines: Thermoucoustic Stirlinq Enqine :13
At the most efficient operating point, the engine delivers 710 W to its resonator with an efficiency of 0.30 which corresponds to 41% of the Carnot efficiency. At the most powerlul operating point, the engine delivers 890 W to its resonator with an efficiency of 0.22
Thermoacoustic engines and refrigerators were already being considered a few years ago for specialized applications, where their simplicity, lack of lubrication and sliding seals, and their use of environmentally harmless working fluids were adequate compensation for their lower efficiencies. This latest breakthrough, coupled with other developments in the design of high-power, single-frequency loudspeakers and reciprocating electric generators, suggests that thermoacoustics may soon emerge as an environmentally attractive way to:
Power hybrid electric vehicles
Capture solar energy
Refrigerate food
Air condition buildings
Liquefy industrial gases
Residential Co-generation
Navy Warships
Space Shuttles
and serve in other capacities that are yet to be imagined.
In 2099, the International Academy of Engineering probably will again convene an expert panel to select the outstanding technological achievements of the 21st century. We hope the machines that our unborn grandchildren see on that list will include thermoacoustic devices, which promise to improve everyone s standard of living while helping to protect the planet
Free Piston Enqines: Thermoucoustic Stirlinq Enqine :14
RtRt4cEs
1. Mathur. M. I and Sharma. R. P., Internal Combustion Engines.
2. Technical Guidance- Scott Backhaus, U. S. Dept. s Los Alamos National Laboratory.
3. Backhaus, S., and G. W. Swift. 2000. A thermoacoustic Stirling heat engine. Journal of the Acoustical Society of America 107:3148 3166,
June 2000.
4. 5. L. Garrett and S. Backhaus. The power of sound. American Scientist, 88 (6), 516-525, Nov.-Dec. 2000.
5. Ceperley, P. H. 1979. A pistonless Stirling engine The traveling wave heat engine. Journal of the Acoustical Society of America 66:1508 1513.
6. 5. Backhaus and G. W. Swift, A thermoacoustic-Stirling heat engine, Nature, 399: 335-338, May 1999.
7. Swift, G. W. 1988. Thermoacoustic engines. Journal of the Acoustical Society of America 88:1145 1180.
8. Swift, G. W. 1997. Thermoacoustic natural gas liquefier. Proceedings of the DOE Natural Gas Conference, Morgantown, West Virginia: Federal
Energy Technology Center.
9. Swift, G. W. 1997. Thermoacoustic engines and refrigerators. In Encyclopedia of Applied Physics 21:245 264, ed. G. L. Trigg. New York:
Wiley-VCH.
10.Yazaki, T., A. Iwata, T. Maekawa and A. Tominaga. 1998. Traveling wave thermoacoustic engine in a looped tube. Physical Review Letters
81:3128 3132.
11 .Journal, The stirling Machine World, USA.
Angel
(04-07-2009, 05:00 PM)remshad_m Wrote: [ -> ]The Free Piston Engine is a combination of reciprocating engine and rotary turbine. It is called free piston engine because the freedom motion for Mechanical linkage which gives variable stroke according to load.

ADVANTAGES

1. Mechanical simplicity
2. Less power to weight ratio
3. Lower turbine operating tempeatures
4. Multi fuel capability
5. Flexibility and reliability
6. Easy starting and control
LIMITATIONS
1. Poor fuel economic
2. Less stability
3. Poor part load efficiency
4. High combustine rates
5. Reduction gearing

APPLICATIONS

1. Free piston engines are widely used as submarine air compressor units
2. These engines are suitable for power generation in medium power range
3. Free piston engine have been tride in ship propulsion, road and rail traction and even in aircrafts.
4. It is used in mixed gas steam cycle
Free Piston Engine

The Free Piston Engine is a combination of reciprocating engine and rotary turbine. It is called free piston engine because the freedom motion for Mechanical linkage which gives variable stroke according to load.

ADVANTAGES

1. Mechanical simplicity
2. Less power to weight ratio
3. Lower turbine operating tempeatures
4. Multi fuel capability
5. Flexibility and reliability
6. Easy starting and control
LIMITATIONS
1. Poor fuel economic
2. Less stability
3. Poor part load efficiency
4. High combustine rates
5. Reduction gearing

APPLICATIONS

1. Free piston engines are widely used as submarine air compressor units
2. These engines are suitable for power generation in medium power range
3. Free piston engine have been tride in ship propulsion, road and rail traction and even in aircrafts.
4. It is used in mixed gas steam cycle
The Free Piston Engine is a combination of reciprocating engine and rotary turbine. It is called free piston engine because the freedom motion for Mechanical linkage which gives variable stroke according to load.

ADVANTAGES

1. Mechanical simplicity
2. Less power to weight ratio
3. Lower turbine operating tempeatures
4. Multi fuel capability
5. Flexibility and reliability
6. Easy starting and control
LIMITATIONS
1. Poor fuel economic
2. Less stability
3. Poor part load efficiency
4. High combustine rates
5. Reduction gearing

APPLICATIONS

1. Free piston engines are widely used as submarine air compressor units
2. These engines are suitable for power generation in medium power range
3. Free piston engine have been tride in ship propulsion, road and rail traction and even in aircrafts.
4. It is used in mixed gas steam cycle
[attachment=6555]
Free-Piston Engine

Peter Van Blarigan
Sandia National Laboratories


Goals of the Free-Piston Engine Research Prototype

To study the effects of continuous operation (i.e. gas exchange) on indicated thermal efficiency and emissions at high compression ratios ( 20-40:1)

Concept validation of passively coupling the opposed free pistons via the linear alternators connected to a common load to maintain piston synchronization

Proof of principle of electronic variable compression ratio control
please read http://seminarsprojects.net/Thread-non-c...ull-report and http://seminarsprojects.net/Thread-free-piston-engine for getting more information about NON CONVENTIONAL I.C ENGINES and Free Piston Engine
i hav an 8 pages abstract abt this free piston engine..
i need more information on its working with diagram and its cycle with diagramatic explanation.
Pages: 1 2