![]() |
single phase dual converter application - Printable Version +- Free Academic Seminars And Projects Reports (https://easyreport.in) +-- Forum: Seminars Topics And Discussions (https://easyreport.in/forumdisplay.php?fid=30) +--- Forum: Engineering Seminars Topics (https://easyreport.in/forumdisplay.php?fid=7) +---- Forum: Seminar Requests (https://easyreport.in/forumdisplay.php?fid=29) +---- Thread: single phase dual converter application (/showthread.php?tid=16684) |
single phase dual converter application - sentra - 08-16-2017 single phase dual converter application The high-level schematic shown below is built from six main blocks. The DC motor, the two single-phase full converters, and the bridge firing unit are provided with the Simscape Power Systems library. More details on these blocks are available in the reference sections of these blocks. The two other blocks are specific to the Electric Drives library. These blocks are the speed controller and the current controller. They allow speed or torque regulation. A "regulation switch" block allows you to toggle from one type of regulation to the other. During torque regulation the speed controller is disabled. It is possible to use a simplified version of the drive, which contains an average-value model of the single-phase dual-converter and allows faster simulation. single phase dual converter application - cryon2007 - 08-16-2017 i want single phase dual converter application i want single phase dual converter application i want single phase dual converter application i want single phase dual converter application i want single phase dual converter application i want single phase dual converter application i want single phase dual converter application i want single phase dual converter application |