8051 microcontroller in EDWinXP - Printable Version +- Free Academic Seminars And Projects Reports (https://easyreport.in) +-- Forum: Seminars Topics And Discussions (https://easyreport.in/forumdisplay.php?fid=30) +--- Forum: Miscellaneous Seminars Topics (https://easyreport.in/forumdisplay.php?fid=21) +---- Forum: General Seminar Topics (https://easyreport.in/forumdisplay.php?fid=58) +---- Thread: 8051 microcontroller in EDWinXP (/showthread.php?tid=46195) |
8051 microcontroller in EDWinXP - neodss - 10-04-2017 8051 microcontroller in EDWinXP [attachment=16166] 8051 Microcontroller in EDWinXP The 8051 microcontroller in EDWinXP help the users to build real-time circuits. The 8051 can be interfaced with external devices like seven segment displays, interrupt generator, serial/pattern generator etc. Using the 8051 microcontroller in EDWinXP 1. Open EDWinXP Main from Start Programs EDWinXP Ver x.xx EDWinXP Main. 2. Open the Schematic Page (Mixed-Mode Simulator) by double clicking on the Page {MAIN PAGE} under Project Circuit [MAINHIER] Diagram Page {MAIN PAGE}. 3. Load 8051 microcontroller and Preprocess it. The necessary timing for the controller is given by connecting a crystal across the pins XTAL1 and XTAL2. The timing can be provided manually by applying a clock of the desired frequency of the crystal to the pin XTAL1/XTAL2. 4. This is done by selecting Tools Instruments Preset Logic Clock Generator 5. Connect nodes on XTAL1/XTAL2 6. Now by clicking on either of the two nodes XTAL1/XTAL2 the following window appears |