Cathode Ray Oscilloscope - Printable Version +- Free Academic Seminars And Projects Reports (https://easyreport.in) +-- Forum: Seminars Topics And Discussions (https://easyreport.in/forumdisplay.php?fid=30) +--- Forum: Miscellaneous Seminars Topics (https://easyreport.in/forumdisplay.php?fid=21) +---- Forum: Physics Seminar Topics (https://easyreport.in/forumdisplay.php?fid=25) +---- Thread: Cathode Ray Oscilloscope (/showthread.php?tid=62056) |
Cathode Ray Oscilloscope - vps17 - 10-06-2017 RUBY CHAUDHARY [attachment=7981] INTRODUCTION Invented by German scientist Karl Ferndinand Braun in 1897. He introduced CRT with Fluorescent screen and named it as CRO. Consist of Cathode Ray Tube(CRT) CRTs operates well in voltage range of 2-5 kv Popular instrument to show time, voltage both DC and AC. Shows Volts / Time. Display waveforms. Opetares on Voltages. Very fast X-Y Plotter Movement of luminous spot in response to Input Voltage traces waveform w.r.t Time . Cathode Ray Oscilloscope Cathode (-ve ) is heated, emits electrons, accelerated toward a (+ve) fluorescent screen Horizontal deflection plates. Vertical deflection plates Phosphor screen(Fluorescent screen) All are enclosed in Glass envelope. Cathode Ray Tube(CRT) When electrons hit the screen the phosphor is excited and emits light. Persistence. How long the display glows. Connect a signal to Vertical deflection plate. At same time a voltage that increases linearly with time (Ramp) is applied to the Horizontal deflection plates. This horizontal linear deflection is produced by the Sweep generator. Sawtooth wave. When the sweep signal returns to zero ie the end of the sweep, the beam flies back to the start position. The beam is cut off during the flyback time. The display is made to appear stationary. This controlled by your adjustment settings. The eye sees a waveform. X is <--> Horizontal Y is ^ Vertical Height of trace The signal is amplified by the vertical amplifier, applied to the vertical plates. A portion of the vertical amplifier signal is applied to the Sweep Trigger. The sweep trigger generates a pulse This pulse turns on the sweep generator initiating the sawtooth wave form. The sawtooth wave is amplified by the horizontal amp and applied to the horizontal deflection plates The trigger can be based on 50 (60) Hz Cathode Ray Oscilloscope - amalvijinanu - 10-06-2017 [attachment=6660] Introduction: Look and play Read instructions Break into smaller parts Decide on a simple measurement Increase your level of difficulty Record pathway. How you got there. Store directions and short-cuts Cathode Ray Oscilloscope Popular instrument to show time, voltage both DC and AC. Shows Volts / Time. Display waveforms. Spectrum scope shows volts to Frequency Cathode (-ve ) is heated, emits electrons, accelerated toward a (+ve) fluorescent screen. Intensity grid, Focus grid, Accelerating anode. (Electron gun) Horizontal deflection plates. Vertical deflection plates |