literature survey for 89c51 microcontroller - Printable Version +- Free Academic Seminars And Projects Reports (https://easyreport.in) +-- Forum: Seminars Topics And Discussions (https://easyreport.in/forumdisplay.php?fid=30) +--- Forum: Engineering Seminars Topics (https://easyreport.in/forumdisplay.php?fid=7) +---- Forum: Seminar Requests (https://easyreport.in/forumdisplay.php?fid=29) +---- Thread: literature survey for 89c51 microcontroller (/showthread.php?tid=63164) |
literature survey for 89c51 microcontroller - mukesh singh gwal - 10-06-2017 AT89C51 is an 8-bit microcontroller and belongs to Atmel's 8051 family. ATMEL 89C51 has 4KB of Flash programmable and erasable read only memory (PEROM) and 128 bytes of RAM. It can be erased and program to a maximum of 1000 times. In 40 pin AT89C51, there are four ports designated as P1, P2, P3 and P0. All these ports are 8-bit bi-directional ports, i.e., they can be used as both input and output ports. Except P0 which needs external pull-ups, rest of the ports have internal pull-ups. When 1s are written to these port pins, they are pulled high by the internal pull-ups and can be used as inputs. These ports are also bit addressable and so their bits can also be accessed individually. Port P0 and P2 are also used to provide low byte and high byte addresses, respectively, when connected to an external memory. Port 3 has multiplexed pins for special functions like serial communication, hardware interrupts, timer inputs and read/write operation from external memory. AT89C51 has an inbuilt UART for serial communication. It can be programmed to operate at different baud rates. Including two timers & hardware interrupts, it has a total of six interrupts. Features Compatible with MCS-51 Products 4K Bytes of In-System Reprogrammable Flash Memory Fully Static Operation: 0 Hz to 24 MHz Three-level Program Memory Lock 128 x 8-bit Internal RAM 32 Programmable I/O Lines Two 16-bit Timer/Counters Six Interrupt Sources Programmable Serial Channel Low-power Idle and Power-down Modes 40-pin DIP |