automatic streetlight on off with sms controlling and failure detection with indicat

[sesha]

AUTOMATIC STREETLIGHT ON/OFF WITH SMS
CONTROLLING AND FAILURE DETECTION
WITH INDICATION
Abstract:
The aim of this project is to operate the street lights using SMS from anywhere using
mobile and this system also monitors the light status and intimate whenever it fails to glow.
With the present system we need lot of man power to control the switches and most of
the time operator forgets to switch off the lights in the morning which results in lot of power
wastage. These problems can be solved using present technologies. There are many technologies
are coming out to make our lives more comfort, time saving, safer and luxurious. In this project
we are using GSM technology.
Cell phones use GSM technology. The microcontroller plays the key role in this project.
The GSM modem will be interfaced to the microcontroller which continuously receives the
messages from the user cell phone and passes the same to the microcontroller.
The GSM modem will be interfaced to the microcontroller section through serial port
interface. If the user wants to operate the lights, he can just send a predefined message to the
GSM modem that is interfaced to the controller section. The controller section will have the
switch controls of the devices. All the lights which are to be controlled will be connected to the
controlling device i.e., to the microcontroller section. The microcontroller in return, sends a
message to the mobile number about the status of all the lights.
At controlling side we have GSM modem with one SIM, micro controller, lights
controlling circuit, light status detecting feedback system.
The user has to send a predefined SMS to the phone number which inserted in modem
then modem will indicate this new message to controller ,controller will read this message and
control the lights according to message it received. This system also detects light failure
condition and sends this information to electricity board.

reference;http://cprosoftwp-content/uploads/projects/power%20system%20hardware%20based%202013%20pdf/83.pdf

[harsh]

Abstract

The aim of this project is to operate the street lights using SMS from anywhere using mobile and this system also monitors the light status and intimate whenever it fails to glow. With the present system we need lot of man power to control the switches and most of the time operator forgets to switch off the lights in the morning which results in lot of power wastage. These problems can be solved using present technologies. There are many technologies are coming out to make our lives more comfort, time saving, safer and luxurious. In this project we are using GSM technology. Cell phones use GSM technology. The microcontroller plays the key role in this project. The GSM modem will be interfaced to the microcontroller which continuously receives the messages from the user cell phone and passes the same to the microcontroller. The GSM modem will be interfaced to the microcontroller section through serial port interface. If the user wants to operate the lights, he can just send a predefined message to the GSM modem that is interfaced to the controller section. The controller section will have the switch controls of the devices. All the lights which are to be controlled will be connected to the controlling device i.e., to the microcontroller section. The microcontroller in return, sends a message to the mobile number about the status of all the lights. At controlling side we have GSM modem with one SIM, micro controller, lights controlling circuit, light status detecting feedback system. The user has to send a predefined SMS to the phone number which inserted in modem then modem will indicate this new message to controller ,controller will read this message and control the lights according to message it received. This system also detects light failure condition and sends this information to electricity board.

[chandru.s50]

Sir I requred full information about this project please help me