10-04-2017, 08:34 PM
PLASTER New masonry surfaces
must be allowed to cure completely.
It is recommended to allow 28 days
as the curing time for new masonry
surfaces.
CLEANING Surface should be free
from any loose paint, dust or grease.
Growths of fungus, algae or moss
should be removed by wire brushing
and water. In case of areas having
excessive dampness use Asian
Paints DampBlock to limit further
dampness. When the underlying
surface exhibits chalkiness, in spite of
thorough surface cleaning, use Asian
Paints Exterior Sealer.
FILLING FOR CRACKS For filling
cracks upto 3mm use Asian Paints
SmartCare Exterior Sealer.
FILLING FOR HOLES & DENTS
Use Asian Paints Acrylic Wall Putty
or white cement and fine sand in the
ratio 1:3.
For interior surfaces or substrates
that are subjected to continuous
seepage or dampness, kindly
use Asian Paints SmartCare
Damp Block before the top coat
application.
https://asianpaintscontent/dam/asianpain...-shyne.pdf
