10-04-2017, 09:11 PM
The MSEDCL is installing the digital energy meter for industrial consumers having load 20 HP and above, which has the provision of showing the PF and insisting to maintain the average power factor above 0.90 for LT and HT consumers.
Automatic Power Factor Control Panel (APFC Panel) For maintaining the power factor according to the load factor, proper capacity of capacitors is to be connected. The value of capacitors to be connected will vary with respect to load and its existing PF. There are two ways to maintain PF-
Fixing of capacitor at the load end permanently or at the mains. Generally which is recommended for the fixed load like pumps, fans etc. and it is not possible for the load which has variations in the load and PF.
The power factor can be maintained by installing Automatic Power Factor Control Panel (APFC Panel)
EEPSIT Automatic Power Factor Control Panel
APFC Panel has microcontroller based programmable controller which switches the capacitor banks of suitable capacity automatically in multiple stages by directly reading the reactive load (RKVA) which works in the principle of VAR sensing tends to maintain the PF to 0.99 Lag. The capacitor banks may be selected in number of stages as 4/6/8 according to the load pattern.
Install APFC Panel to avoid penalties and enjoy the benefits automatically.
