Posts: 76
Threads: 36
Joined: Oct 2009
Reputation:
0
Adaptive Partition Scheduler
Adaptive Partition Schedulers are a relatively new type of partition scheduler, pioneered with the most recent version of the QNX operating system. Adaptive Partitioning (or AP) allows the real-time system designer to request that a percentage of processing resources be reserved for a particular subsystem (group of threads and/or processes). The operating systems priority driven pre-emptive scheduler will behave in the same way that a non-AP system would until the system is overloaded (i.e. system-wide there is more computation to perform, than the processor is capable of sustaining over the long term). During overload, the AP scheduler enforces hard limits on total run-time for the subsystems within a partition (as dictated by the allocated percentage of processor bandwidth for the particular partition). If the system is not overloaded, a partition that is allocated (for example) 10% of the processor bandwidth, can, in fact, use more than 10%, as it will borrow from the spare budget of other partitions (but will be required to pay it back later). This is very useful for the non real-time subsystems that experience variable load, since these subsystems can make use of spare budget from hard real-time partitions in order to make more forward progress than they would in a Fixed Partition Scheduler such as ARINC-653, but without impacting the hard real-time subsystems deadlines.
Posts: 52
Threads: 24
Joined: Oct 2009
Reputation:
0
Adaptive Partition Schedulers are a relatively new type of partition scheduler, pioneered with the most recent version of the QNX operating system. Adaptive Partitioning (or AP) allows the real-time system designer to request that a percentage of processing resources be reserved for a particular subsystem (group of threads and/or processes). The operating systems priority driven pre-emptive scheduler will behave in the same way that a non-AP system would until the system is overloaded (i.e. system-wide there is more computation to perform, than the processor is capable of sustaining over the long term). During overload, the AP scheduler enforces hard limits on total run-time for the subsystems within a partition (as dictated by the allocated percentage of processor bandwidth for the particular partition). If the system is not overloaded, a partition that is allocated (for example) 10% of the processor bandwidth, can, in fact, use more than 10%, as it will borrow from the spare budget of other partitions (but will be required to pay it back later). This is very useful for the non real-time subsystems that experience variable load, since these subsystems can make use of spare budget from hard real-time partitions in order to make more forward progress than they would in a Fixed Partition Scheduler such as ARINC-653, but without impacting the hard real-time subsystems deadlines.
Posts: 50
Threads: 20
Joined: Jul 2009
Reputation:
0
type of partition scheduler, pioneered with the most recent version of the QNX operating system. Adaptive Partitioning (or AP) allows the real-time system designer to request that a percentage of processing resources be reserved for a particular subsystem (group of threads and/or processes). The operating systems priority driven pre-emptive scheduler will behave in the same way that a non-AP system would until the system is overloaded (i.e. system-wide there is more computation to perform, than the processor is capable of sustaining over the long term). During overload, the AP scheduler enforces hard limits on total run-time for the subsystems within a partition (as dictated by the allocated percentage of processor bandwidth for the particular partition). If the system is not overloaded, a partition that is allocated (for example) 10% of the processor bandwidth, can, in fact, use more than 10%, as it will borrow from the spare budget of other partitions (but will be required to pay it back later). This is very useful for the non real-time subsystems that experience variable load, since these subsystems can make use of spare budget from hard real-time partitions in order to make more forward progress than they would in a Fixed Partition Scheduler such as ARINC-653, but without impacting the hard real-time subsystems deadlines.
Posts: 57
Threads: 21
Joined: Mar 2009
Reputation:
0
Adaptive Partition Scheduler
i hav to tak seminar on dis topic..so pls help me to find some details on dis..
Posts: 58
Threads: 32
Joined: May 2009
Reputation:
0
hai
i want full details of Adaptive partition schduler. Can u send that plz