Posts: 55
Threads: 25
Joined: Aug 2009
Reputation:
0
solar based electromagnetic braking system pdf
Abstract
The aim of this project is to develop an electromagnetic system breaking solar sensor on the basis of using the facilities for cars. This project is mainly used in cars or two or four vehicles. This design is used in real time, so we can avoid many accidents.
Brief methodology:
This project is designed for the following blocks
microcontroller
Solar panel with battery.
Object Sensor
Driver Circuit
relay
The electromagnetic core
Breaking System
object sensor detects an object, and outputs corresponding signals. These electrical signals are very small signal voltage of the mill, so given the amplifier circuit. The amplifier circuit is configured by operational amplifier which operates as a power amplifier.
Then, the amplifier provides signal conditioning unit, which is also designed with an operational amplifier. In this circuit, the operational amplifier acting as a comparator, and to generate a rectangular pulse, this microcontroller. The microcontroller can be ATMEL / PIC / RENESAS / ARM microcontrollers. It will work in accordance with our subject we have already programmed.
In accordance with the value of the object sensor, the microcontroller activates the driver circuit in accordance with said program. driver circuit is constructed with a transistor that acts as a switch for the relay. The output relay is directly connected to the electromagnetic core, which is attached in the breaking system.
Whenever we control the brake, at a time that occurs in the system means that one of the coil windings arranged around it. It generates an electromotive force, and it is equipped with suitable mechanical dial. Similarly, when we let go of the power generation of the break will be stopped and the emission coil winding of a mechanical dial.
The entire kit is only operated by solar energy. The solar panel comprises a number of elements of silicon, when sunlight is incident on this panel, it generates voltage signals, these signals are voltage charging circuit data.
Depending on the size of the board increases the amount of generated voltage. The charging voltage signal circuit boards from coming together and stored in the battery. Battery power is used for driving the vehicle
Advantage:
It is possible to use all types of vehicles
budget
Low power consumption
Posts: 39
Threads: 15
Joined: Oct 2009
Reputation:
0
solar based electromagnetic braking system pdf
Abstract
The objective of this project is to design the solar based Electromagnetic breaking system using Object sensor for Automobiles. This project is mainly used in Vehicles either two or four wheelers. In this project is used in real time we can avoid so many accidents.
Brief Methodology:
This project is designed by following blocks
Microcontroller
Solar panel with battery.
Object sensor
Driver circuit
Relay
Electromagnetic core
Breaking system
The object sensor senses the object and gives corresponding signals. These electrical signals are very small mill voltage signal, so it is given to amplifier circuit. The amplifier circuit is constructed with operational amplifier which acts as power amplifier.
Then the amplifier signal is given to signal conditioning unit which also constructed with operational amplifier. In this circuit operational amplifier act as comparator and generate the square pulse given to microcontroller. The microcontroller may be ATMEL/PIC/RENESAS/ARM microcontroller. It will work according to our object already we have programmed.
According to the object sensor value, the microcontroller activates the driver circuit as per mentioned in the program. The driver circuit is constructed with transistor which acts as switch to control the relay. The relay output is directly connected to the electromagnetic core which is attached in the breaking system.
Whenever we control the brake, at the time what happens in the system means one of the coil winding is placed around it. It generates the electromotive force and it's fitted with the suitable mechanical set. Likewise when we release the break the force generation will be stopped and the coil winding releases from the mechanical set.
Entire kit is controlled by only solar power. Solar panel consists of number of silicon cells, when sun light falls on this panel it generate the voltage signals then these voltage signals given to charging circuit.
Depends on the panel board size the generated voltage amount is increased. In charging circuit the voltage signal from the board is gathered together and stored in the battery. The battery power is used to control the vehicle
Advantage:
Can use all type of vehicles
Low cost
Low power consumption
Posts: 64
Threads: 26
Joined: Jul 2009
Reputation:
0
Abstract
The objective of this project is to design the solar based Electromagnetic breaking system using Object sensor for Automobiles. This project is mainly used in Vehicles either two or four wheelers. In this project is used in real time we can avoid so many accidents.
Brief Methodology:
This project is designed by following blocks
Microcontroller
Solar panel with battery.
Object sensor
Driver circuit
Relay
Electromagnetic core
Breaking system
The object sensor senses the object and gives corresponding signals. These electrical signals are very small mill voltage signal, so it is given to amplifier circuit. The amplifier circuit is constructed with operational amplifier which acts as power amplifier.
Then the amplifier signal is given to signal conditioning unit which also constructed with operational amplifier. In this circuit operational amplifier act as comparator and generate the square pulse given to microcontroller. The microcontroller may be ATMEL/PIC/RENESAS/ARM microcontroller. It will work according to our object already we have programmed.
According to the object sensor value, the microcontroller activates the driver circuit as per mentioned in the program. The driver circuit is constructed with transistor which acts as switch to control the relay. The relay output is directly connected to the electromagnetic core which is attached in the breaking system.
Whenever we control the brake, at the time what happens in the system means one of the coil winding is placed around it. It generates the electromotive force and it's fitted with the suitable mechanical set. Likewise when we release the break the force generation will be stopped and the coil winding releases from the mechanical set.
Entire kit is controlled by only solar power. Solar panel consists of number of silicon cells, when sun light falls on this panel it generate the voltage signals then these voltage signals given to charging circuit.
Depends on the panel board size the generated voltage amount is increased. In charging circuit the voltage signal from the board is gathered together and stored in the battery. The battery power is used to control the vehicle
Advantage:
Can use all type of vehicles
Low cost
Low power consumption.
Posts: 53
Threads: 23
Joined: Oct 2009
Reputation:
0
Electromagnetic brakes (also called electro-mechanical brakes or EM brakes) slow or stop motion using electromagnetic force to apply mechanical resistance (friction). The original name was "electro-mechanical brakes" but over the years the name changed to "electromagnetic brakes", referring to their actuation method. Since becoming popular in the mid-20th century especially in trains and trams, the variety of applications and brake designs has increased dramatically, but the basic operation remains the same.
Both electromagnetic brakes and eddy current brakes use electromagnetic force but electromagnetic brakes ultimately depend on friction and eddy current brakes use magnetic force directly.
Posts: 51
Threads: 26
Joined: Aug 2009
Reputation:
0
Hi am Mohamed i would like to get details on solar based electromagnetic braking system pdf ..My friend Justin said solar based electromagnetic braking system pdf will be available here and now i am living at .. and i last studied in the college/school .. and now am doing ..i need help on ..etc
