Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
WIRELESS PATIENT MONITORING SYSTEM TO MEASURE HEARTBEAT, BODY TEMPERATURE AND RESP
#1

[attachment=7423]
This article is presented by:
M N A SIDDIQUI
M.Tech

WIRELESS PATIENT MONITORING SYSTEM TO MEASURE HEARTBEAT, BODY TEMPERATURE AND RESPIRATION


ABSTRACT
Recently the health care sensors are playing a vital role in hospitality.

The patient monitoring systems is one of the major improvement in the hospitality because of its advanced technology.

A wireless patient monitoring system to measure heartbeat, body temperature and respiration by using embedded technology.

INTRODUCTION
In general, a compact sensor, is used to monitor the heartbeat in analog form and to check the condition of the patient we required some more components such as thermometer and respiration.

So we are here, just connected the temperature sensor and heartbeat sensor so that simultaneously we can monitor the patient s condition.

An embedded technology is used instead of dsp technology to develop this system so that it is easy to operate and available at an affordable cost.
EXISTING SYSTEM

There are some systems present in the market but all are having some difficulties

Compact sensor

Digital Heartbeat monitor

MAIN OBJECTIVE
To overcome the disadvantages of previous systems

The specialist staying at a distance can monitor the patient condition so that he can save the life of the patient.

This system is to be available at reasonable prices.

Embedded technology is to be use so that we can monitor the patient condition easily.


PROPOSED METHOD

An advanced technique WIRELESS PATIENT MONITORING SYSTEM FOR HEARTBEAT ,BODY TEMPERATURE AND RESPIRATION is used.

There are mainly two parts of the system one is transmitter and the other one is receiver.
The transmitter is placed near the patient and the receiver is with the specialist doctor. So when there is any abnormality in the patient s condition then he can monitor the situation.


MAIN OBJECTIVE

To overcome the disadvantages of previous systems

The specialist staying at a distance can monitor the patient condition so that he can save the life of the patient.

This system is to be available at reasonable prices.

Embedded technology is to be use so that we can monitor the patient condition easily.
PROPOSED METHOD

An advanced technique WIRELESS PATIENT MONITORING SYSTEM FOR HEARTBEAT ,BODY TEMPERATURE AND RESPIRATION is used.

There are mainly two parts of the system one is transmitter and the other one is receiver.
The transmitter is placed near the patient and the receiver is with the specialist doctor. So when there is any abnormality in the patient s condition then he can monitor the situation.

MODULES

An Embedded technology is used here.

Atmel (AT89C51) is used in this system.

RF technology is used to transmit and receive the data.

To operate more easily we are using this type of microcontroller instead of dsp technology.

To reduce the complexity

BLOCK DIAGRAM OF THE SYSTEM


The signal is transmitted by using the equation
HEART BEAT MONITORING

It is very important that the heartbeat is to be normal. That is 72 BPM.

If there is any abnormality, then the patient is in the trouble.

Here we have two types to monitor the heartbeat
TYPES OF HEARTBEAT MONITORING
ECG


PULSE
ELECTRO CARDIO GRAM
The Electrodes are conned to the patient s body

The electrical activity is generated based on that the specialist can treat.
PULSE
The heart beat is measured when the blood passes from the heart to the other parts of the limbs once per beat.

The physician looks for the pulse on the wrist of the patient
TEMPERATURE SENSOR
We can measure the temperature by using two types of sensors

Thermistors

Resistance thermometers.

DESIGN OF A MICROCONTROLLER


The microprocessor design accomplishes a very flexible

The Microcontroller that is used in this system is
AT89C51 manufactured by Atmel, MC, USA.

Full Duplex UART


8 Bit CPU optimized for control applications

The Microcontroller provides internal 256 bytes of RAM. Theses 256 bytes of internal RAM.

Input/Output port

Four I/O ports are available in AT89C51.

Each are with 8 bits only

These ports can be operated individually.
Comparision
ADVANTAGES OF PROPOSED METHOD

The staying of specialist is eliminated.

It is a multipurpose so that overall conditions are easily measured.

Easy to operate.

Compare with compact sensor it gives better performance.
CONCLUSION

Modern technologies have developed that promotes comfortable and better life which is disease free.

PREVENTION IS BETTER THAN CURE


This system is intelligent than previous systems.
FUTURE SCOPE


Multiple parameters like Blood pressure, retinal size, age and weight can be included as controlling parameters in the future.
This system also developed by using Bluetooth technology in future.
INTERFACE TO THE COMPUTER
EXPERIMENT RESULTS

On different conditions
Reply

#2
This topic also gives the brief description about scope of the project and design methodology.Patient Monitoring System is a process where a surgeon can continuously monitor morethan one patient at a time in remote place.

1.1 Proposed Work
Some severe diseases and disorders e.g. heart failure needs close and continualmonitoring procedure after diagnosis, in order to prevent mortality or further damage assecondary to the mentioned diseases or disorders. Monitoring these types of patients,usually, occur at hospitals or healthcare centers. Heart arrhythmias for instance, in manycases, need continual long-term monitoring. However, the patients are often too earlyreleased, owing to need of hospital bed for another patient on the waiting list, who needsto be hospitalized immediately.
1.2 Scope of the Work
Long waiting time for hospitalization or ambulatory patient monitoring/treatment, areother well-known issues for both the healthcare institutions and the patients. This project provides healthcare authorities to maximize the quality and breadth of healthcare services by controlling costs. As the population increases and demand for services increases, theability to maintain the quality and availability of care, while effectively managingfinancial and human resources, is achieved by this project. The use of moderncommunication technology in this context is the sole decisive factor that makes suchcommunication system successful

In transmitter circuit the Heat Beat is measured by LED and LDR, then it is appliedto the microcontroller. The Microcontroller maintains the records of the measuredreadings. It compares the measured heart beat with the normal readings and checks it iswithin the normal range or not. If it is normal, then it keeps record of the same and thereadings in SMS(Short Messaging Service) form to the specified mobile number. Thetime specified for sending message is given by the user

CHAPTER 2
SYSTEM DESCRIPTION
2.1 INTRODUCTION
Embedded systems are one of the emerging technologies which are touchingevery nook and corner of the mind. It is impossible to live without these embeddedgadgets -says ELECTRONICS magazine. From the above statement, the liveliness of embedded system can be understood. Data communications is one of the most rapidlygrowing commercial market areas today, especially wireless communications . In the past few years, wireless data communications has grown from an obscure and expensivecuriosity into a practical and affordable communication and networking technology.The convenience of wireless is very appealing as not to deal with running cablesto and from devices in order to interconnect them, and wireless devices can be moved toany location within the transmission range, while still being able to communicate and broadcast data. Due to this, it is expected that wireless data communications will becomeeven more popular and more extensively used in the medical field. Currently the most popular method of wireless communications is radio frequency transmission. As thesedevices have a very low power consumption and power output
,
Reply

#3
to get information about the topic "WIRELESS PATIENT MONITORING SYSTEM TO MEASURE HEARTBEAT, BODY TEMPERATURE AND RESPI"refer the page link bellow

http://seminarsprojects.net/Thread-wirel...spi?page=2

http://seminarsprojects.net/Thread-wirel...-and-respi
Reply

#4
To get more information about the topic "WIRELESS PATIENT MONITORING SYSTEM TO MEASURE HEARTBEAT, BODY TEMPERATURE AND R" please refer the page link below

http://seminarsprojects.net/Thread-wirel...?pid=52804
Reply

#5
To get more information about the topic "WIRELESS PATIENT MONITORING SYSTEM TO MEASURE HEARTBEAT, BODY TEMPERATURE AND R" please refer the page link below

http://seminarsprojects.net/Thread-wirel...?pid=52804
Reply

#6
to get information about the topic"WIRELESS PATIENT MONITORING SYSTEM TO MEASURE HEARTBEAT, BODY TEMPERATURE AND RESPI"refer the page link bellow

http://seminarsprojects.net/Thread-wirel...?pid=52804
Reply

#7
hey siddique ,, bro can u plzz mail me the circuit diagram and the components required for the above project on my email id : [email protected] ,, plzz it would be a great help for me from your side Big Grin
Reply

#8
Can you Please send the Circuit Diagram for the above project..
My email id is : [email protected]

I would be greatly thankfull.
Reply

#9
Can you please send the circuit diagram for this project..it wil help me alot

email id : [email protected]

Thank you
Reply

#10
PLEASE SEND ME CIRCUIT DIAGRAM AS SOON AS POSSIBLE ON
"[email protected]"

Waiting for your reply

tHank
Reply



Forum Jump:


Users browsing this thread:
1 Guest(s)

Powered By MyBB, © 2002-2024 iAndrew & Melroy van den Berg.