08-16-2017, 10:58 PM
Insulated gate bipolar transistor
[attachment=437]
Equivalent circuit for IGBT
The insulated gate bipolar transistor or IGBT is a three-terminal power semiconductor device primarily used as an electronic switch and in newer devices is noted for combining high efficiency and fast switching. It switches electric power in many modern appliances: electric cars, trains, variable speed refrigerators, air-conditioners and even stereo systems with switching amplifiers. Since it is designed to turn on and off rapidly, amplifiers that use it often synthesize complex waveforms with pulse width modulation and low-pass filters. In switching applications modern devices boast pulse repetition rates well into the ultrasonic range frequencies which are at least ten times the highest audio frequency handled by the device when used as an analog audio amplifier.
The IGBT combines the simple gate-drive characteristics of the MOSFETs with the high-current and low saturation-voltage capability of bipolar transistors by combining an isolated gate FET for the control input, and a bipolar power transistor as a switch, in a single device. The IGBT is used in medium- to high-power applications such as switched-mode power supplies, traction motor control and induction heating. Large IGBT modules typically consist of many devices in parallel and can have very high current handling capabilities in the order of hundreds of ampereswith blocking voltages of 6000 V, equating to hundreds of kilowatts.
The IGBT is a fairly recent invention. The first-generation devices of the 1980s and early 1990s were relatively slow in switching, and prone to failure through such modes as latchup (in which the device won't turn off as long as current is flowing) and secondary breakdown (in which a localized hotspot in the device goes into thermal runaway and burns the device out at high currents). Second-generation devices were much improved, and the current third-generation ones are even better, with speed rivaling MOSFETs, and excellent ruggedness and tolerance of overloads.[1]
The extremely high pulse ratings of second- and third-generation devices also make them useful for generating large power pulses in areas likeparticle and plasma physics, where they are starting to supersede older devices like thyratrons and triggered spark gaps.
Their high pulse ratings, and low prices on the surplus market, also make them attractive to the high-voltage hobbyist for controlling large amounts of power to drive devices such as solid-state Tesla coils and coilguns.
Availability of affordable, reliable IGBTs is an important enabler for electric vehicles and hybrid cars.
Device structure
An IGBT cell is constructed similarly to a n-channel vertical construction power MOSFET except the n+ drain is replaced with a p+ collector layer, thus forming a vertical PNP bipolar junction transistor.
This additional p+ region creates a cascade connection of a PNP bipolar junction transistor with the surface n-channel MOSFET.
Comparison with power MOSFETs
An IGBT has a significantly lower forward voltage drop compared to a conventional MOSFET in higher blocking voltage rated devices. As the blocking voltage rating of both MOSFET and IGBT devices increases, the depth of the n- drift region must increase and the doping must decrease, resulting in roughly square relationship increase in forward conduction loss compared to blocking voltage capability of the device. By injecting minority carriers (holes) from the collector p+ region into the n- drift region during forward conduction, the resistance of the n- drift region is considerably reduced. However, this resultant reduction in on-state forward voltage comes with several penalties:
IGBT models
Rather than using a device physics-based model, SPICE simulates IGBTs using Macromodels, a method that combines an ensemble of components such as FETs and BJTs in aDarlington configuration.[citation needed] An alternative physics-based model is the Hefner model, introduced by Allen Hefner of the NIST. It is a fairly complex model that has shown very good results. Hefner's model is described in a 1988 paper and was later extended to a thermo-electrical model and a version using SABER.[19]