08-16-2017, 11:58 PM
ami motherboard zx 865gv v2 1 drivers free download
AMIBIOS Support
Please follow the steps below carefully for AMIBIOS support. Use the AMIBIOS Checkpoint and beep Codes to aid in problems that occur during the pre-boot process. Use the AMIBIOS Flash Utility to flash your AMI BIOS. Use this version if of the AMIBIOS Flash Utility if you are flashing an AMIBIOS that is using core 6.31 or earlier.
Identify your motherboard
To identify your motherboard, you may either run the AMI Motherboard Identification Utilityor you may view the BIOS string on bootup.
Turn the system power off.
Unplug your keyboard or hold down one of the keys on the keyboard.
Power-on the system (you should get a keyboard error).
Notice the long string of numbers in the lower left hand corner of your screen. This is your BIOS identification string. It will look like one of these:
BIOS from 1991 - Present
51-0102-zz5123-00111111-101094-AMIS875-P
This indicates a motherboard with BIOS from 1991 to the present.
If the next to the last set of BOLD letters is:
AMI - it is a TRUE AMI motherboard - the numbers that follow are the motherboard series number - i.e. S875 is a Series 875 motherboard
from 1986 - 1990
DINT- 1123-04990-K8
This indicates a motherboard with BIOS from 1986 - 1990.The BIOS identification number for this BIOS identification string, which is in BOLD and is in the first set of numbers, would be 1123.
If the first BOLD number of the first set of numbers in BIOS from 1986 - 1990 is:
1, 2, 8, or a letter - it is a NON-AMI Taiwanese manufactured motherboard
3, 4, or 5 - it is a TRUE AMI motherboard
50 or 6 - it is a NON-AMI US made motherboard
9 - it is an evaluation BIOS for a Taiwanese manufacturer
NOTE: If you have a identification number that corresponds to a NON-AMI motherboard you will need to contact the company or person who sold you the product.
Go to your motherboard manufacturer for support.
We do not have your BIOS upgrade. Only your motherboard manufacturer can give you this upgrade. Most manufacturers have BIOS upgrades available on their website. If you can't determine your motherboard manufacturer, contact the company or person who sold you the product.
AFUDOS v4.xx
AFUDOS is a BIOS update utility, also referred to as a "BIOS flash utility", with a command line interface for MS-DOS
# The target board MUST use AMIBIOS Core 7.xx or AMIBIOS8 # Older AMIBIOS systems support the AMIFLASH.COM program. This utility offers the following features:
Small executable file size
Quickly update
Clear updating information and status
Fully compatible with previous version (See Appendix B AFUDOS v3.xx Commands)
Supported Operating System
DOS environment (MS-DOS, FreeDOS, ..)
Getting Started:
Copy the AFUDOS.EXE executable file to any storage location accessible by the host system and then run AFUDOS in command prompt.
Basic Usage:
AFUDOS ROMFILE.ROM /P /C
Program main BIOS image, reset CMOS to defaults
AFUDOS ROMFILE.ROM /P /B /N /C
Program main BIOS image & bootblock image
Reset CMOS and NVRAM to defaults
AFUWIN v4.xx
AFUWIN is an updating system BIOS utility with command line and GUI interface
It has same command line parameters and behavior as AFUDOS plus a simple graphical interface
The target board MUST use AMIBIOS Core 7.xx or AMIBIOS8
Older AMIBIOS systems support the AMIFLASH.COM program, which works in MS-DOS
AFUWIN Utility is supported in following operating systems:
Microsoft' Windows' 98
Microsoft' Windows' ME
Microsoft' Windows' 2000 (32bit & 64bit editions)
Microsoft' Windows' NT 4.0
Microsoft' Windows' XP/XP64
Microsoft' Windows' PE
Microsoft' Windows' Vista (32bit & 64bit editions)
Operating System Driver Requirements:
UCOREVXD.VXD Driver for Microsoft' Windows' 98/ME
UCORESYS.SYS Driver for Microsoft' Windows' NT/2000/XP/PE/Vista (32bit)
UCOREW64.SYS Driver for Microsoft' Windows' XP64 & Vista (64bit)
Getting Started:
Copy AFUWIN.EXE, UCOREVXD.VXD, UCORESYS.SYS and UCOREW64.SYS to any storage location accessible by the host system and then run AFUWIN in command prompt
Remember that three files MUST be in same directory
For launching GUI mode, just double-click on AFUWIN.EXE
TO use in command line mode, run AFUWIN.EXE from a Microsoft' Windows' command prompt.
I WANT AUDIO DRIVERS for my mother board please show me