08-17-2017, 12:42 AM
thermal power plant engineering objective questions
Thermal Power Plant Objective Questions Answers 3
1. Which type of coal has lowest calorific value:
a) peat
b) lignite
c) bituminous
d) anthracite
2. Pipes carrying steam in thermal power plant are generally made of:
a) steel
b) cast iron
c) aluminium
d) cobalt
3. Economizer of boiler has main function of:
a) heat up the incoming water with excess steam
b) heat up the pulverized fuel by exhaust gases
c) heat up the incoming air by exhaust gases
d) heat up the incoming water by exhaust gases
4. In a super heater:
a) pressure rises and temperature drops
b) temperature rises and pressure drops
c) temperature rises and pressure remains unchanged
d) pressure rises and temperature remains the same
5. Steam turbine works on the principle of:
a) carnot cycle
b) brayton cycle
c) rankine cycle
d) none of the above
6. The steam power plant efficiency can be improved by:
a) using large quantity of water
b) burning large quantity of coal
c) using high temperature and pressure of steam
d) decreasing the load on the plant
7. As the size of the thermal power plant increases, the capital cost per kW of installed capacity:
a) increases
b) decreases
c) remains the same
d) may increase and decrease
8. Vacuum can be measured by using:
a) rotameter
b) pitot tube
c) U tube manometer
d) ventrimeter
9.Electrostatic precipitator is installed between:
a) induced fan and chimney
b) air preheater and induced fan
c) economizer and air preheater
d) boiler furnace and economiser
10. Belt conveyors can be employed for transporting coal at inclination up to:
a) 75 deg
b) 60 deg
c) 30 deg
d) 15 deg