10-04-2017, 08:03 PM
car parking using labview
Abstract
This paper intends to represent the development of Automated Car Braking System using fuzzy logic for parking purpose. This project will involve replacing usual car reverse warning system to one application which it will react to the obstacle range and stop the car when it close to obstacle. To realize this application, this project will use Labview simulation software to create the fuzzy logic controller and present the simulation output.
Introduction
It possibly controls the traffic and avoids traffic congestion. This automatic multi-level vehicle stacking system also has online access to book the parking slot in advance which is interfaced with the LabVIEW. The vehicle placed at the entrance point is parked automatically according to the availability of slots. The car park consists of number of slots based on three different sizes. The car is moved to the particular slot with help of an elevator placed at the centre of the parking system. The elevator consists of an arm that moves along the vertical axis and can rotate along the multi stack parking system. LabVIEW is used to check the availability of slots, total number of cars parked the movement of the elevator and the position of the arm. The programming software tracks the location of the vehicle and returns the vehicle on request from the patron by the access system installed. Thus the paper shows the description of the automatic multi-level vehicle stacking with microcontroller and fuzzy mechanism using LabVIEW to achieve conventional parking system.