Data Transmission Modes

[LAK]

Data Transmission Modes
1.Simplex: 1. In simplex mode the communication can take place only in one direction. The receiver receives the signal from the transmitting device. This mode of flow of information is Unidirectional. Example: Radio, T.V., Pager transmission.
2.Half-duplex: In half-duplex mode the communication channel is used in both directions, but only in one direction at a time. Thus a half-duplex line can alternately send and receive data.Example is the wireless communication.
3.Full-duplex: In full duplex the communication channel is used in both directions at the same time. Use of full-duplex line improves the efficiency as the line turn-around time required in half-duplex arrangement is eliminated. Example of this mode of transmission is the telephone line.
Simplex, half-duplex and full-duplex connections
There are 3 different transmission modes characterised according to the direction of the exchanges:
A simplex connection is a connection in which the data flows in only one direction, from the transmitter to the receiver. This type of connection is useful if the data do not need to flow in both directions (for example, from your computer to the printer or from the mouse to your computer..).
A half-duplex connection (sometimes called an alternating connection or semi-duplex) is a connection in which the data flows in one direction or the other, but not both at the same time. With this type of connection, each end of the connection transmits in turn. This type of connection makes it possible to have bidirectional communications using the full capacity of the line.
A full-duplex connection is a connection in which the data flow in both directions simultaneously. Each end of the line can thus transmit and receive at the same time, which means that the bandwidth is divided in two for each direction of data transmission if the same transmission medium is used for both directions of transmission.