Posts: 60
Threads: 19
Joined: Jul 2009
Reputation:
0
automatic drilling and tapping machine ppt
This project deals with Design and Fabrication of Automatic Tapping and Drilling Machine. In the present market the combined drilling cum tapping machine is not available. For tapping we need either a manual process or a tapping attached in a drilling machine. The former one consumes lot of time the later is quite costlier.For tapping operation we need to rotate the spindle in both clockwise and counter clockwise direction. In our machine we have made bevel gear arrangement for auto reversal of the spindle. Thus based on the functional and economical aspects we have fabricated a unique machine.Drilling is a cutting process that uses a drill bit to cut or enlarge a hole of circular cross-section in solid materials. The drill bit is a rotary cutting tool, often multipoint. The bit is pressed against the workpiece and rotated at rates from hundreds to thousands of revolutions per minute. This forces the cutting edge against the workpiece, cutting off chips (swarf) from the hole as it is drilled.
Posts: 52
Threads: 24
Joined: Jul 2009
Reputation:
0
automatic drilling and tapping machine ppt
At Sugino Corp., we have been providing manufacturing equipment of exceptional quality since 1936. We offer reliable products in a variety of areas, including a full line of automated drilling and tapping equipment. We offer a diverse array of Selfeeder Component Drilling Units, including air and electric types with up to 7.5 HP. The electric series features highly precise air feed drilling and rapid advancement. Servo-driven, pneumatic, and portable concentric models are also available. We also provide a variety of precision tapping units, such as the STB H/L 108U Synchro Tapper. This model is operated electrically, and features reverse strokes and a fast-action approach to complete work cycles quickly. It is designed to complement any system that uses automatic drilling equipment. These units are just a few of the many high quality drilling and tapping systems we have available.
Posts: 49
Threads: 20
Joined: Jun 2009
Reputation:
0
Pneumatic Universal Sharpener
Air Sanders includes fixed upper body, lower body, the ring wall, the upper sealing sealing element below the rotor blade somewhat, Central shaft and grinding Assembly tray. inlet port ring wall is located above the exhaust pipe and inlet and outlet Canal isolated central locking ring. The upper element has the following upper seal ring stopper and cover the upper part of the body. Lower zakuporiva ij element has a lower ring clamp and lower housing cover. dust cover is set around a second bearing to prevent splashing of dust from contact with a second bearing.
Posts: 60
Threads: 29
Joined: Aug 2009
Reputation:
0
Please give me ppt of tapping machine and also about its constructional features
Posts: 64
Threads: 27
Joined: Jul 2009
Reputation:
0
please can you give me the detail report on drilling and tapping machine
