dtmf to glow led

[harsha]

dtmf to glow led

This DTMF (Dual Tone Multi Frequency) decoder circuit identifies the dial tone from the telephone line and decodes the key pressed on the remote telephone. Here for the detection of DTMF signaling, we are using the IC MT8870DE which is a touch tone decoder IC. It decodes the input DTMF to 5 digital outputs. The M-8870 DTMF (Dual Tone Multi Frequency) decoder IC uses a digital counting technique to determine the frequencies of the limited tones and to verify that they correspond to standard DTMF frequencies. The DTMF tone is a form of one way communication between the dialer and the telephone exchange. The whole communication consists of the touch tone initiator and the tone decoder or detector. The decoded bits can be interfaced to a computer or microcontroller for further application (For example, Remote control of home/office electrical appliances using a telephone network, Cell Phone controlled home appliances, Mobile phone controlled robot, etc.).Recommended for better understanding:

[NANI]

we need to detect a specific frequemcy from dtmf and use it to glw an led.. and we need help on how to proceed on it..
thanks..