Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
mechanical energy into electrical energy
#1

[attachment=5168]
mechanical energy into electrical energy

INTRODUCTION
In this model we show that how we can generate a voltage from the busy traffic. Conversion of the mechanical energy into electrical energy is widely used concept. It s a mechanism to generate power by converting the potential energy generated by a vehicle going up on a speed breaker into rotational energy. We have used that simple concept to the project. We connect one mechanical rod with the dynamo and fit this rod on the surface of the road. When any vehicle moves from this roller then due to friction, vehicle Rotate the rod or roller and roller then move the dynamo. When dynamo move then it generates a voltage and this voltage now connects to the bulbs. In actual practice with the help of this voltage we will charge the battery and then we use this voltage to light the small bulb.
If we install this unit to the any small flyover then with the help of this voltage we generate a small voltage, and with the help of this voltage we light the bulb.
Reply

#2

If these devices are embedded in a continuous flow of people where, as in the city shopping malls, railway platforms, city pavements, the power generated by these devices can be used for street lighting.[/align]
Method does not require direct beam is usually very inefficient, because the energy radiated in all directions and only a small amount of the desired destination.
Reply



Forum Jump:


Users browsing this thread:
1 Guest(s)

Powered By MyBB, © 2002-2024 iAndrew & Melroy van den Berg.