Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Rainwater harvesting from rooftop catchments
#1

Rainwater harvesting from rooftop catchments

[attachment=17642]
The application of an appropriate rainwater harvesting technology can make possible the utilization of rainwater as a valuable and, in many cases, necessary water resource. Rainwater harvesting has been practiced for more than 4, 000 years, and, in most developing countries, is becoming essential owing to the temporal and spatial variability of rainfall. Rainwater harvesting is necessary in areas having significant rainfall but lacking any kind of conventional, centralized government supply system, and also in areas where good quality fresh surface water or groundwater is lacking.
Annual rainfall ranging from less than 500 to more than 1 500 mm can be found in most Latin American countries and the Caribbean. Very frequently most of the rain falls during a few months of the year, with little or no precipitation during the remaining months. There are countries in which the annual and regional distribution of rainfall also differ significantly.

Technical Description
A rainwater harvesting system consists of three basic elements: a collection area, a conveyance system, and storage facilities. The collection area in most cases is the roof of a house or a building. The effective roof area and the material used in constructing the roof influence the efficiency of collection and the water quality.
A conveyance system usually consists of gutters or pipes that deliver rainwater falling on the rooftop to cisterns or other storage vessels. Both drainpipes and roof surfaces should be constructed of chemically inert materials such as wood, plastic, aluminum, or fiberglass, in order to avoid adverse effects on water quality.

Additional features might include:
- A device to indicate the amount of water in the tank
- A sediment trap, tipping bucket, or other "foul flush" mechanism
- A lock on the tap
- A second sub-surface tank to provide water for livestock, etc.
The following questions need to be considered in areas where a rainwater cistern system project is being considered, to establish whether or not rainwater catchment warrants further investigation:
- Is there a real need for an improved water supply?
- Are present water supplies either distant or contaminated, or both?
- Do suitable roofs and/or other catchment surfaces exist in the community?
- Does rainfall exceed 400 mm per year?

Extent of Use
Rainwater harvesting is used extensively in Latin America and the Caribbean, mainly for domestic water supply and, in some cases, for agriculture and livestock supplies on a small scale. In Brazil and Argentina, rainwater harvesting is used in semi-arid regions. In Central American countries like Honduras (see case study in Part C, Chapter 5), Costa Rica, Guatemala, and El Salvador, rainwater harvesting using rooftop catchments is used extensively in rural areas.
Reply



Forum Jump:


Users browsing this thread:
1 Guest(s)

Powered By MyBB, © 2002-2024 iAndrew & Melroy van den Berg.