Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
interface sim900 with avr by codevision
#1

In this article, we are going to see how to interface GSM Module to Arduino. There are different kinds of GSM modules available in market. We are using the most popular module based on Simcom SIM900 and Arduino Uno for this tutorial. Interfacing a GSM module to Arduino is pretty simple. You only need to make 3 connections between the gsm module and arduino. So lets get to business!

A GSM Module is basically a GSM Modem (like SIM 900) connected to a PCB with different types of output taken from the board say TTL Output (for Arduino, 8051 and other microcontrollers) and RS232 Output to interface directly with a PC (personal computer). The board will also have pins or provisions to attach mic and speaker, to take out +5V or other values of power and ground connections. These type of provisions vary with different modules.

Lots of varieties of GSM modem and GSM Modules are available in the market to choose from. For our project of connecting a gsm modem or module to arduino and hence send and receive sms using arduino its always good to choose an arduino compatible GSM Module that is a GSM module with TTL Output provisions.

Notes on GSM Module

1. We use SIM900 GSM Module This means the module supports communication in 900MHz band. We are from India and most of the mobile network providers in this country operate in the 900Mhz band. If you are from another country, you have to check the mobile network band in your area. A majority of United States mobile networks operate in 850Mhz band (the band is either 850Mhz or 1900Mhz). Canada operates primarily on 1900 Mhz band. Please read this wiki entry on GSM Frequency Bands around the World.

2. Check the power requirements of GSM module GSM modules are manufactured by different companies. They all have different input power supply specs. You need to double check your GSM modules power requirements. In this tutorial, our gsm module requires a 12 volts input. So we feed it using a 12V,1A DC power supply. I have seen gsm modules which require 15 volts and some other types which needs only 5 volts input. They differ with manufacturers. If you are having a 5V module, you can power it directly from Arduino s 5V out.

Note:- GSM Modules are manufactured by connecting a particular GSM modem to a PCB and then giving provisions for RS232 outputs, TTL outputs, Mic and Speaker interfacing provisions etc. The most popular modem under use is SIM 900 gsm modem from manufacturer SIMCom. They also manufacture GSM Modems in bands 850, 300 and other frequency bands.

3. Check for TTL Output Pins in the module You can feed the data from gsm module directly to Arduino only if the module is enabled with TTL output pins. Otherwise you have to convert the RS232 data to TTL using MAX232 IC and feed it to Arduino. Most of the gsm modules in market are equipped with TTL output pins. Just ensure you are buying the right one.
Reply

#2

Hi.i would like to get a full programm by codevision to connect a sim900.i want to send and receive call and sms via avr and sim900.
Thanks so much
Reply



[-]
Quick Reply

Forum Jump:


Users browsing this thread:
1 Guest(s)

Powered By MyBB, © 2002-2024 iAndrew & Melroy van den Berg.