Please send me the ppt of igct.While reading the report of igct i cann't find the circuits,waweform that described in report.so please send them immediately. ....etc

[:=Read Full Message Here=:]

The Integrated Gate Commutated Thyristor (IGCT) is a new high-power semiconductor device. IGCT is a special type of thyristor similar to a GTO. They can be turned on and off by a gate signal, have lower conduction loss as compared to GTOs, and withstand higher rates of voltage rise (dv/dt), such that no snubber is required for most applications.The structure of an IGCT is very similar to a GTO thyristor. In an IGCT, the gate turn off current is greater than the anode current. This results in a complete elimination of minority carrier injection ....etc

[:=Read Full Message Here=:]

ABSTRACT
The Integrated Gate Commutated Thyristor (IGCT) combines the advantages of the hard driven GTO thyristor, including its dramatically improved turn- off performance, with technological breakthroughs at the device, gate-drive and application levels. Homogenous switching area of the IGCT up to the dynamic avalanche limits. Snubber circuits are no longer needed. Improved loss characteristics allow high frequency applications extending into the kHz range. A new IGCT device ....etc

[:=Read Full Message Here=:]

igct

Thyristor technology is inherently superior to transistor for blocking voltage values above 2.5kV, plasma distributions equal to those of diodes offering the best trade-off between the on-state and blocking voltages. Until the introduction of newer power switches, the only serious contenders for high-power transportation systems and other applications were the GTO (thyristor), with its cumbersome snubbers, and the IGBT (transistor), with its inherently high losses. Until now, adding the gate turn-off feature has re ....etc

[:=Read Full Message Here=:]

igct

Thyristor technology is inherently superior to transistor for blocking voltage values above 2.5kV, plasma distributions equal to those of diodes offering the best trade-off between the on-state and blocking voltages. Until the introduction of newer power switches, the only serious contenders for high-power transportation systems and other applications were the GTO (thyristor), with its cumbersome snubbers, and the IGBT (transistor), with its inherently high losses. Until now, adding the gate turn-off feature has re ....etc

[:=Read Full Message Here=:]

integrated gate commutated thyristor igct ppt

The integrated gate-commutated thyristor (IGCT) is a power semiconductor electronic device, used for switching electric current in industrial equipment. It is related to the gate turn-off (GTO) thyristor. It was jointly developed by Mitsubishi and ABB.Like the GTO thyristor, the IGCT is a fully controllable power switch, meaning that it can be turned both on and off by its control terminal (the gate). Gate drive electronics are integrated with the thyristor device.

All ABB IGCTs (Integrated Gate-C ....etc

[:=Read Full Message Here=:]

am doing project on this topic so please i wanna to the futher information about dis topic ....etc

[:=Read Full Message Here=:]

respected sir/madam

kindly upload the full pdf offinger print phenomenon of biometrics for security of vital places as soon as possible.
if you can't upload here then just mail me [email protected]

thanking you
your sincerly
Raja
IIT
B.TECH (3rd year,ECE) ....etc

[:=Read Full Message Here=:]

Lightning Protection Using LFA-M

Introduction
A new simple, effective and inexpensive method for lightning protection of medium voltage overhead distribution line is using long flashover arresters (LFA). A new long flashover arrester model has been developed. It is designated as LFA-M. It offers great number of technical and economical advantages.

The important feature of this modular long flashover arrester (LFA-M) is that it can be applied for lightning protection of overhead distribution line against both induc ....etc

[:=Read Full Message Here=:]

integrated gate commutated thyristor igct ppt

The integrated gate-commutated thyristor (IGCT) is a power semiconductor electronic device, used for switching electric current in industrial equipment. It is related to the gate turn-off (GTO) thyristor. It was jointly developed by Mitsubishi and ABB.Like the GTO thyristor, the IGCT is a fully controllable power switch, meaning that it can be turned both on and off by its control terminal (the gate). Gate drive electronics are integrated with the thyristor device.

All ABB IGCTs (Integrated Gate-C ....etc

[:=Read Full Message Here=:]

An IGCT is a special type of thyristor similar to a GTO. They can be turned on and off by a gate signal, have lower conduction loss as compared to GTOs, and withstand higher rates of voltage rise (dv/dt), such that no snubber is required for most applications.

The structure of an IGCT is very similar to a GTO thyristor. In an IGCT, the gate turn off current is greater than the anode current. This results in a complete elimination of minority carrier injection from the lower PN junction and faster turn off times. The main difference is a redu ....etc

[:=Read Full Message Here=:]

Please send me the ppt of igct.While reading the report of igct i cann't find the circuits,waweform that described in report.so please send them immediately. ....etc

[:=Read Full Message Here=:]

integrated gate commutated thyristor igct ppt

The integrated gate-commutated thyristor (IGCT) is a power semiconductor electronic device, used for switching electric current in industrial equipment. It is related to the gate turn-off (GTO) thyristor. It was jointly developed by Mitsubishi and ABB.Like the GTO thyristor, the IGCT is a fully controllable power switch, meaning that it can be turned both on and off by its control terminal (the gate). Gate drive electronics are integrated with the thyristor device.

All ABB IGCTs (Integrated Gate-C ....etc

[:=Read Full Message Here=:]

igct

Thyristor technology is inherently superior to transistor for blocking voltage values above 2.5kV, plasma distributions equal to those of diodes offering the best trade-off between the on-state and blocking voltages. Until the introduction of newer power switches, the only serious contenders for high-power transportation systems and other applications were the GTO (thyristor), with its cumbersome snubbers, and the IGBT (transistor), with its inherently high losses. Until now, adding the gate turn-off feature has re ....etc

[:=Read Full Message Here=:]

An IGCT is a special type of thyristor similar to a GTO. They can be turned on and off by a gate signal, have lower conduction loss as compared to GTOs, and withstand higher rates of voltage rise (dv/dt), such that no snubber is required for most applications.

The structure of an IGCT is very similar to a GTO thyristor. In an IGCT, the gate turn off current is greater than the anode current. This results in a complete elimination of minority carrier injection from the lower PN junction and faster turn off times. The main difference is a redu ....etc

[:=Read Full Message Here=:]

igct

Thyristor technology is inherently superior to transistor for blocking voltage values above 2.5kV, plasma distributions equal to those of diodes offering the best trade-off between the on-state and blocking voltages. Until the introduction of newer power switches, the only serious contenders for high-power transportation systems and other applications were the GTO (thyristor), with its cumbersome snubbers, and the IGBT (transistor), with its inherently high losses. Until now, adding the gate turn-off feature has re ....etc

[:=Read Full Message Here=:]

to get information about the topic gi fi technology full report ppt and related topic refer the page link bellow

http://seminarsprojects.net/Thread-gi-fi ....etc

[:=Read Full Message Here=:]

ABSTRACT
The Integrated Gate Commutated Thyristor (IGCT) combines the advantages of the hard driven GTO thyristor, including its dramatically improved turn- off performance, with technological breakthroughs at the device, gate-drive and application levels. Homogenous switching area of the IGCT up to the dynamic avalanche limits. Snubber circuits are no longer needed. Improved loss characteristics allow high frequency applications extending into the kHz range. A new IGCT device ....etc

[:=Read Full Message Here=:]

to get information about the topic wireless fedility full report ppt and related topic refer the page link bellow

http://seminarsprojects.net/Thread-wi-fi-wireless-fidelity-with-ppt-and-doc

http://seminarsprojects.net/Thread-wireless-fidelity-full-report?pid=16332&mode=threaded

http://seminarsprojects.net/Thread-wireless-fidelity ....etc

[:=Read Full Message Here=:]