|
| Thread / Post | Tags |
Title: Laser Beam Welding of 5182 Aluminum Alloy Sheet
Page Link: Laser Beam Welding of 5182 Aluminum Alloy Sheet -
Posted By: chintu.kay1986
Created at: Thursday 05th of October 2017 05:14:32 AM
| |
Abstract
Conditions were determined for consistent coupling of a CO2 laser beam to weld 5182 aluminum
alloy sheet. Full penetration butt and bead-on-plate welds on 0.8 and 1.8 mm sheets were
performed. Process conditions examined included beam mode, spot size and irradiance,
shielding gas flow, and edge quality and fitup. The observed weld quality variations with the
different process parameters were consistent with physical phenomena and a threshold irradiance
model. Optimal conditions were determined for obtaining consistent weld ....etc
[:=Read Full Message Here=:]
|
|
|
|
|
|
|
Title: KJV ALLOY CONDUCTORS PVT LTD
Page Link: KJV ALLOY CONDUCTORS PVT LTD -
Posted By: naveen kumar
Created at: Thursday 05th of October 2017 04:29:19 AM
| |
K.J.V. ALLOY CONDUCTORS PVT. LTD.
COMPANY PROFILE :
We started our operations with manufacturing AAC (All Aluminium Conductor), ACSR (Aluminium Conductor Steel Reinforced), Bare Aluminum Wire & Strips, Bare Aluminum Alloy Wire, in theyear 1989. Subsequently we included AAC (All Aluminium Alloy Conductor) & Paper Covered (Insulated) Wire & Strips to our product mix for distribution & transmission power lines .
SUPPLIES TO :
We have supplied our products to maj ....etc
[:=Read Full Message Here=:]
|
|
|
|
|
|
|
Title: free ppt download on aluminium alloy conductor
Page Link: free ppt download on aluminium alloy conductor -
Posted By: amitha
Created at: Thursday 05th of October 2017 05:18:47 AM
| |
to get information about the topic download on aluminium alloy conductorfull report ppt and related topic refer the page link bellow
http://seminarsprojects.net/Thread-seminar-on-turbo-generator ....etc
[:=Read Full Message Here=:]
|
Title: aluminium alloy conductors ppt
Page Link: aluminium alloy conductors ppt -
Posted By: sreedominates
Created at: Thursday 05th of October 2017 03:48:54 AM
| |
Aluminium conductor steel-reinforced cable (ACSR) is a type of high-capacity, high-strength stranded conductor typically used in overhead power lines. The outer strands are high-purity aluminium, chosen for its excellent conductivity, low weight and low cost. The center strand, or strands is/are of steel for additional strength to help support the weight of the conductor. Steel is higher strength than aluminium which allows for increased mechanical tension to be applied on the conductor. Steel also has lower elastic and inelastic deformation (p ....etc
[:=Read Full Message Here=:]
|
Title: All aluminum alloy conductors AAAC report
Page Link: All aluminum alloy conductors AAAC report -
Posted By: kamlesh4U
Created at: Thursday 17th of August 2017 05:58:17 AM
| |
Abstract:
All aluminum alloy conductors (AAC) are made of high-strength aluminum-magnesium-alloy silicon. These conductors are designed to provide a better resistance to weight ratio and offer improved electrical properties, excellent shear stress characteristics and superior corrosion resistance
Characteristics
High resistance to weight ratio
Better sinking characteristics
Improved electrical properties
Excellent corrosion resistance
see data sheet
http://ww.nescoodisha.com/Technical_Specification_of_55S ....etc
[:=Read Full Message Here=:]
|
Title: seminar re on sport performance evaluation of aluminium alloy 7075 for use in tool d
Page Link: seminar re on sport performance evaluation of aluminium alloy 7075 for use in tool d -
Posted By: karthikiyer2k
Created at: Thursday 05th of October 2017 03:23:19 AM
| |
....etc
[:=Read Full Message Here=:]
|
|
|
|
|
Title: Guideline for Aluminum Alloy Conductors
Page Link: Guideline for Aluminum Alloy Conductors -
Posted By: jaeksjayakrishnan
Created at: Thursday 05th of October 2017 05:05:30 AM
| |
Guideline for Aluminum Alloy Conductors for Distribution Feeder Applications with Recommendations for Connections
A Distribution Feeder Installation
1 Distribution feeder conductors in sizes #6 AWG to 1000 kcmil may be copper
or aluminum conductor material (ACM).
i. Aluminum alloy conductors shall be compact stranded conductors of
NUAL (AA-8030) as manufactured by Alcan Cable or of a recognized
8000 Series aluminum alloy conductor material by the Aluminum
Association.
ii. ....etc
[:=Read Full Message Here=:]
|
Title: Optimal Closed Die Finish Forgings for Nimonic80-A alloy Using FEM Method
Page Link: Optimal Closed Die Finish Forgings for Nimonic80-A alloy Using FEM Method -
Posted By: engg.priyansh
Created at: Thursday 05th of October 2017 04:53:50 AM
| |
ABSTRACT:
Conventional closed die forging, is widely used for manufacture of superalloy parts. Despite recent technological advancements in the area of forging design, empirical and trial-and-error methods are still widely used in forging super alloy materials. This paper investigates the effect of flash thickness and various geometrical forging design parameters including internal and external drafts and internal and external corner radii, on the die cavity filling, forging load and raw material cost when forging Nimonic80-A a superal ....etc
[:=Read Full Message Here=:]
|
Title: synopsis for optimising the machining parameters of alloy steel
Page Link: synopsis for optimising the machining parameters of alloy steel -
Posted By: kannan
Created at: Thursday 17th of August 2017 06:10:40 AM
| |
synopsis for optimising the machining parameters of alloy steel
synopsis for optimising the machining parameters of alloy steel ....etc
[:=Read Full Message Here=:]
|
Title: super alloy machinig ppt
Page Link: super alloy machinig ppt -
Posted By: SONIA
Created at: Thursday 05th of October 2017 05:03:19 AM
| |
They re practically twins. Some might say this about superalloys and titanium, but as with most twins, there are a few subtle differences.
Materials like nickel-base, chrome-base, and iron-base superalloys are extremely heat resistant, even more than titanium, so most of the heat produced during machining is absorbed by the cutting edge.
This can wreak havoc on the cutting tool and cause damage ranging from crater wear, to plastic deformation, to complete tool failure.
Most superalloys are not flammable, so they can be machined with ceramic ....etc
[:=Read Full Message Here=:]
|