A mechanism is a simplified model, usually in the form of a line diagram, which is used to reproduce the movement occurring in a machine. The purpose of this reproduction is to allow the nature of the machine. The purpose of this reproduction is to allow the nature of the movement to be investigated without the imposition of the various solid bodies forming the machine elements. The various parts of the mechanism are called links or elements. An arbitrary set of couplings forming a Closed which is capable of relative ....etc

[:=Read Full Message Here=:]

Bicycle powered water pump
This is a centrifugal water pump which is run by rotating the pedal of a cycle. he system comprises a bicycle, rim, beltpulley, impeller and inlet and delivery pipes. The back tyre is replaced by a bare rim which is connected to another pulley of smaller diameter. The supporting shaft of the smaller pulley carries another rim for second stage speed increment. a flywheel is also included in the shaft to increase momentum of the system.The final supporting shaft is connected with an impeller that rotates at hig ....etc

[:=Read Full Message Here=:]

abstract
introduction
classification
operation
advantage
disadvantage
conclusionr ....etc

[:=Read Full Message Here=:]

literature survey of air compressor using pedal power air compressor

Abstract

This paper describes a new approach to design and fabrication of Pedal operated air compressor with the goal of building a working prototype. Here is a try to create a mechanical device that can use the mechanical power operated by pedals as in bicycles to run an air compressor and additional water pump. The additional cooling system is used for maintaining the temperature of compressed air. We used a cycle chain-sprocket system as a basic pedaling power source and ....etc

[:=Read Full Message Here=:]

abstract
contents
introduction
classification
operation
applications
advantage
disadvantage
conclusion ....etc

[:=Read Full Message Here=:]

Compressor Anti-Surge Control Application Introduction
Surges occur when the compressor outlet pressure is too high in relation to the flow through the compressor. The flow can change rapidly when there is a sudden change in the load that the compressor is expected to deliver. If the surge is not controlled, the compressor can be destroyed. An anti-surge control strategy is designed to protect a compressor from these surges. The typical methods for accomplishing surge control are either a blow-off to atmosphere ....etc

[:=Read Full Message Here=:]

A centrifugal clutch is a clutch that uses centrifugal force to connect two concentric shafts, with the driving shaft nested inside the driven shaft. It engages more at higher speeds.

The input of the clutch is connected to the engine crankshaft while the output may drive a shaft, chain, or belt. As engine revolutions per minute increase, weighted arms in the clutch swing outward and force the clutch to engage. The most common types have friction pads or shoes radially mounted that engage the inside of the rim of a housing. On the center sha ....etc

[:=Read Full Message Here=:]

i want the pdf file of pedal powered water pump urgently
....etc

[:=Read Full Message Here=:]

A pump is a device that moves fluids (liquids or gases), or sometimes slurries, by mechanical action. Pumps can be classified into three major groups according to the method they use to move the fluid: direct lift, displacement, and gravity pumps.
Pumps operate by some mechanism (typically reciprocating or rotary), and consume energy to perform mechanical work by moving the fluid. Pumps operate via many energy sources, including manual operation, electricity, engines, or wind power, come in many sizes, from microscopic for use in medical appli ....etc

[:=Read Full Message Here=:]

i want to make a watt governor in catia with simulation please help me..aur send me that file by making it.plz.. ....etc

[:=Read Full Message Here=:]