In the past, hardwired alarm systems are the only choice for customers who need security equipment to protect premises. Today, with rapid technology evolve, many users shift from hardwired alarm to wireless alarm. It seems home security industry is moving from hardwired to wireless, but as one of mature and stable alarm equipment, some users still favor the hard wired alarm system. In this article, we will show you some basic information about advantages and disadvantages of hardwired alarm systems.

What s hardwired alarm system ?

Alarm ....etc

[:=Read Full Message Here=:]

To get full information or details of simple touch alarm circuit please have a look on the pages

http://seminarsprojects.net/Thread-touch-sensitive-alarm

if you again feel trouble on simple touch alarm circuit please reply in that page and ask specific fields in simple touch alarm circuit ....etc

[:=Read Full Message Here=:]

simple touch alarm circuit using ic 555 ppt

Touch the sensor of the alarm with your finger and it starts beeping, goes on for some time and then stops. Touching it again, and it goes again! This little and flexible circuit consists of a touch sensor and a directly coupled transistor amplifier with a small loudspeaker as the output load. Two sensor strips of metal are mounted side by side on a 1 1 cm size micasheet and connected to the input of the circuit.

How the touch alarm works

Under normal conditions no current flows through switching ....etc

[:=Read Full Message Here=:]

l need information regarding simple touch alarm ucing ic555 ....etc

[:=Read Full Message Here=:]

Simple Fire Alarm Circuit
Here is a simple fire alarm circuit based on a LDR and lamp pair for sensing the fire.The alarm works by sensing the smoke produced during fire.The circuit produces an audible alarm when the fire breaks out with smoke.
When there is no smoke the light from the bulb will be directly falling on the LDR.The LDR resistance will be low and so the voltage across it (below .6V).The transistor will be OFF and nothing happens.When there is sufficient smoke to mask the light from falling on LDR, the ....etc

[:=Read Full Message Here=:]

abstract for touch alarm using ic555
bhavana
i need an abstract for touch alarm using ic555 ....etc

[:=Read Full Message Here=:]

abstract or information regarding simple touch alarm using ic555 ....etc

[:=Read Full Message Here=:]

Rain alarm is an application which detects the rain water and blows alarm. They are useful devices and play an important role in various industries such as automobile, irrigation, and wireless communication. Desiging a rain alarm system is quite simple and we have designed here a demo rain alarm project with the help of 555 Timer IC.

Components

Rain sensor (Either you can purchase or build yourself)
555 Timer IC
NPN Transistor BC547
Resistors (470, 100k and 1k ohm)
Capacitor (10uf)
Buzzer
Battery 9v

The main component of this rain alarm is ....etc

[:=Read Full Message Here=:]

KINDLY INFORM US ABOUT THE APPLICATIONS OF THIS PROJECT AND THE CIRCUIT DIAGRAM OF THIS PROJECT ....etc

[:=Read Full Message Here=:]

This simple Touch Switch is developed by using 555 timer IC operated as a MONOSTABLE vibrator. Here the stable stage is LOW, so the timer outputs low after the trigger is removed. Basically in this circuit we will have a LED which turns ON when we touch a pin of timer. The LED will be ON for the time during which the trigger is present. Once the trigger is removed the LED turns OFF.

Circuit Components

+4 to +6 supply voltage
555 IC
470 , 100K resistors
10 F, 100nF (104) capacitors
LED
Touch plates

Circuit Diagram

Simple T ....etc

[:=Read Full Message Here=:]