Introduction:

An obstacle avoiding robot is an intelligent device, which can automatically sense and overcome obstacles on its path. It is developed without micro-controller in order to eliminate critical circuits, difficult programming etc. All you want to do is to just understand the circuit diagram and start doing this robot. This simple technique can be incorporated in wheeled robots to keep them away from damages and accidents.

What s required?

This intelligent robot requires several components to bring them alive. It doesn t cost too ....etc

[:=Read Full Message Here=:]

Introduction:

The design and implementation of obstacle avoider robot using 8051 Microcontroller is being done. It is programmed to avoid running into obstacles and detects the presence of different objects around it and modifies the motion of the motors appropriately. The objects are sensed by the IR (Infra Red) sensors. The microcontroller controls two DC motors of robot to navigate.
Basic Principle:

The basic principle involved in this is it captures the obstacle presence with IR sensors mounted at the three sides of the robot. When ....etc

[:=Read Full Message Here=:]

To get full information or details of obstacle avoiding robot please have a look on the pages

http://seminarsprojects.net/Thread-obstacle-avoiding-robot

if you again feel trouble on obstacle avoiding robot please reply in that page and ask specific fields in obstacle avoiding robot ....etc

[:=Read Full Message Here=:]

Hi,
This is gajanan want to work on robot
So looking for obstacle avoiding robot code in c language
Using 8051 and also avr micro controller
Using IR sensor GP2D12 ..
On LCD distance of Obstacle should display and when
The distance is 10 or 12 cm robot should stop and take
Left or right turn

[email protected] ....etc

[:=Read Full Message Here=:]

obstacle avoiding robot using microcontroller 8051

In today s world Robotics is a quick growing and attention-grabbing field. it's easiest method for contemporary technology modification. Obstacle avoiding robot is starting stage of any automatic robot. This Robot has adequate intelligence to hide the utmost space of provided area. it's a infrared sensing element that square measure accustomed sense the obstacles returning in between the trail of automaton. It'll move in an exceedingly explicit direction and avoid the obstacle that is returni ....etc

[:=Read Full Message Here=:]

i want a code for this project using assembly language can u mail it to me [email protected] plzz ....etc

[:=Read Full Message Here=:]

To get full information or details of obstacle avoiding robot using atmega16 please have a look on the pages

http://seminarsprojects.net/Thread-obstacle-avoiding-robot

if you again feel trouble on obstacle avoiding robot using atmega16 please reply in that page and ask specific fields in obstacle avoiding robot using atmega16 ....etc

[:=Read Full Message Here=:]

To get full information or details of obstacle avoiding robot please have a look on the pages

http://seminarsprojects.net/Thread-OBSTACLE-AVOIDER-AND-COLLISION-CONTROL-ROBOT

http://seminarsprojects.net/Thread-OBSTACLE-AVOIDANCE-ROBOT-REPORT?pid=132491

if you again feel trouble on obstacle avoiding robot please reply in that page and ask specific fields in obstacle avoiding robot ....etc

[:=Read Full Message Here=:]

Robotics is the portion of present connection. ROBOTICS is the rapid development and interesting area in present globe. This is the simplest method for changeable modern technology. Presently, communication is the portion of modern method and hence we conclude the operations on ROBOTICS fields and concepts which will create the human life easy in routine concept and hence we assist this reason.

The Obstacle Avoiding Robot using 8051 Project is the foundation level of any automatic robot. The technology has enough conceptual to include the gr ....etc

[:=Read Full Message Here=:]

Abstract

A very simple obstacle avoiding robot using arduino , this robot uses very simple code and can accomplish the task with ease, check out the video for how the robot is working, its really simple to make not much complicated circuit. It uses HC SR-04 sensor which senses distance between the robot and object. If the distance is maximum and robot can move without colliding , the robot moves in forward direction, if the robot senses object near to it, it takes diversion and moves to the safe place and avoiding colliding to any objects ar ....etc

[:=Read Full Message Here=:]