download ppt on we are not afraid to die

This is a story of extreme courage and skill exhibited by a family of four. A little more nervousness would throw off balance and the inevitable-death would swallow everyone up. Along with the adults, the two children too are worth mentioning as they showed exemplary courage and understanding even in the face of death. Fear and fear factors are associated with death. The idea of losing one s life can throw even the mightiest out of gear. Hence, natural calamities like Earthquake, tsunamis and floods st ....etc

[:=Read Full Message Here=:]

i am project on punch and die design. so ithink it will a lot for further study of die project so please help me ....etc

[:=Read Full Message Here=:]

Modern radiation therapy techniques, such as stereotactic radiotherapy and tomotherapy, deliver the total treatment dose to the patient using many small fields. This helps to construct a dose distribution which delivers a high dose to the tumour, while minimizing the dose to normal tissue. When considering a single small field, the dose resulting from that small field is usually reported as a relative dose factor (RDF). The RDF is the percentage of dose in a small field as compared to a large reference field. Task group report #51 from the Amer ....etc

[:=Read Full Message Here=:]

Stir casting is an economical process for the fabrication of aluminum matrix composites. There are many parameters in this process, which affect the final microstructure and mechanical properties of the composites. In this study, micron-sized SiC particles were used as reinforcement to fabricate Al-3 wt% SiC composites at two casting temperatures (680 and 850 C) and stirring periods (2 and 6 min). Factors of reaction at matrix/ceramic interface, porosity, ceramic incorporation, and agglomeration of the particles were evaluated by scanning elec ....etc

[:=Read Full Message Here=:]

ABSTRACT:
Conventional closed die forging, is widely used for manufacture of superalloy parts. Despite recent technological advancements in the area of forging design, empirical and trial-and-error methods are still widely used in forging super alloy materials. This paper investigates the effect of flash thickness and various geometrical forging design parameters including internal and external drafts and internal and external corner radii, on the die cavity filling, forging load and raw material cost when forging Nimonic80-A a superal ....etc

[:=Read Full Message Here=:]

Abstract

-In this paper, a combustion simulation model for a 4-stroke, direct injection diesel engine is described.
- The combustion modeling was based on the assumption that the combustion process was taken to be only a heat addition process and the in-cylinder conditions are spatially uniform. as the heat release model, the well known wiebe s combustion function and the white house-way s heat release model were studied and successfully employed to the combustion simulation
- A comparison has been m ....etc

[:=Read Full Message Here=:]

A die is a specialized tool used in manufacturing industries to cut or shape material mostly using a press. Like molds, dies are generally customized to the item they are used to create. Products made with dies range from simple paper clips to complex pieces used in advanced technoPunching is a metal forming process that uses a punch press to force a tool, called a punch, through the workpiece to create a hole via shearing. The punch often passes through the work into a die. A scrap slug from the hole is deposited into the die in the process.lo ....etc

[:=Read Full Message Here=:]

i'd like to get full notes regarding Pressure die casting..pls help me. ....etc

[:=Read Full Message Here=:]

i am going to do prokject in this topic.please send me the detailed view of this topic and report with suitable diagram in wor format and power point format ....etc

[:=Read Full Message Here=:]

pleas send me to all information of v bending die to use in project ..& also send auto cad drawing.. ....etc

[:=Read Full Message Here=:]