hi my name is harikrishna
i am doing my M.E project on ''effects of openings in shear wall analysis''
by using e-tabs software.
so i need some material (ppt,documentation)

thank u.. ....etc

[:=Read Full Message Here=:]

In earthquake engineering, vibration control is a set of technical means aimed to mitigate seismic impacts in building and non-building structures.
All seismic vibration control devices may be classified as passive, active or hybrid where:

Base isolator being tested at the UCSD Caltrans-SRMD facility
passive control devices have no feedback capability between them, structural elements and the ground;
active control devices incorporate real-time recording instrumentation on the ground integrated with earthquake input processing equipment ....etc

[:=Read Full Message Here=:]

ABSTRACT

Objective:
To study the effect of fibres on the strength and behaviour of ultra high performance concrete (UHPC)wall panels under one way and two way in plane action.

Methodology:
The UHPC mix already developed (taken from literature) studied in detail with regard to its fresh and hardened properties and durability. Wall panels of size 750x750x35 mm are to be cast with different aspect ratio and volume fraction of fibres for testing under one way in plane action and two way in plane action. The specimen ....etc

[:=Read Full Message Here=:]

I need a seminar report on 1 earthquake vibration control using modified frame shaear wall.
Plzz send me report regarding this topic
Ankit Shah ....etc

[:=Read Full Message Here=:]

rcc column and shear wall difference

RCC walls could be made either for retaining purpose for forces from other sides like soil, water etc. OR RCC walls could be made for partition purpose. But becomes a cost affair as compare to bricks. So you will find this generally in Chemotherapy room of the hospitals. And shear walls are generally made in RCC only. But same could also be made in steel structure, depending on the overall architecture of the building.

So conclusion to this information could be read as.. If wall acts as a fixed support to ....etc

[:=Read Full Message Here=:]

1. Dynamic pounding of tall buildings: In big cities buildings are located nearby, so it is always important to understand the minimum spacing between the structures so that they do not collide with each other during earthquake. You can study that considering the soil structure interaction.

2. Lateral Force Resisting Systems: Study different systems for resisting loads like earthquake and wind and consider Tuned mass dampers, viscous dampers, Braced frames, Moment frames, Outrigger and truss, belt wall, shear wall or any hybrid, but this will ....etc

[:=Read Full Message Here=:]

To get full information or details of shear wall ppt please have a look on the pages

http://seminarsprojects.net/Thread-effects-of-openings-in-shear-wall-analysis

if you again feel trouble on shear wall ppt please reply in that page and ask specific fields in shear wall ppt ....etc

[:=Read Full Message Here=:]

i need full project on seminar on earthquake vibration control using modified frame shear wall ....etc

[:=Read Full Message Here=:]

earthquake vibration control using modified frame shear wall free pdf download

As performance-based seismic design becomes more prevalent, increasing attention is being given to improving building performance during seismic events. Much attention has been given to improving the seismic performance of steel and concrete structures, with relatively little attention having been given to wood frame buildings. Although life-safety is generally not a significant concern for wood frame buildings, the financial impact associated with the damage to suc ....etc

[:=Read Full Message Here=:]

It is often desirable for structural steel members to pass through a fire wall
or common wall rather than being curtailed on each side of the wall. In such cases, the penetrating member will often be fire protected for a certain length on each side of the wall so as to minimise the possibility of fire spread through heat conduction and excessive temperature rise of the member on the unexposed side of the wall. This latter aspect is necessary to ensure that lateral restraint will continue to be provided to the top of the wall by the member on t ....etc

[:=Read Full Message Here=:]