Abstract


A multidisciplinary team of end users and suppliers has collaborated to develop a novel yet broadly enabling process for the design, fabrication and assembly of Micro-Opto-Electro-Mechanical Systems (MOEMS). A key goal is to overcome the shortcomings of the polysilicon layer used for fabricating optical components in a conventional surface micromachining process. These shortcomings include the controllability and uniformity of material stress that is a major cause of curvature and deformation in released microstructures. The appr ....etc

[:=Read Full Message Here=:]

ABSTRACT
Today everyone is aiming at a reduction in greenhouse gas emissions, the requirements for adding new generation capacity can no longer be met by traditional power generation methods of burning the primary fossil fuels such as coal, oil, natural gas, etc. This is why distributed generators (DG) have significant opportunity in the evolving power system network. Both consumers and power utilities can benefit from the widespread deployment of DG systems which offer secure and diversified energy options, increase ....etc

[:=Read Full Message Here=:]

Resources Allocation and coordination in grid using Mobile Agents



INTRODUCTION

Grid Computing: pool of heterogeneous computing resources.

Mobile Agents: software components that moves, communicates and run errands.

Resource Allocation and Coordination: A
critical issue in grid (BenHassine and Ho,2007).

STATEMENT OF PROBLEM

Resource allocation and coordination is a critical issue in the Grid Computing. Grid resource sharing is based on resource brokers whic ....etc

[:=Read Full Message Here=:]

On the macro scale, feedback control is routinely applied to improve performance and enable new tasks in complex and uncertain systems operating in noisy environments. Our lab has focused on applying feedback control ideas to systems on the micro scale. Here we show how control methods can improve existing performance in the UCLA lab-on-a-chip electrowetting system and can create entirely new capabilities in our 'micro fluidic tweezers' cell steering devices.In the Electro-Wetting-On-Dielectric (EWOD) system developed at UCLA by CJ Kim, a grid ....etc

[:=Read Full Message Here=:]

From
Ravichandraprasad

Sir please send the ppt and report of the power paper ....etc

[:=Read Full Message Here=:]

Demand for the research and development of the micro-manufacturing technologies is being fueled by the ever-increasing trend towards miniaturization over a wide spectrum of disciplines and industries. Recent technological advancement in the defense, biomedical, telecom-munications, consumer electronics have spearheaded the need for micromanufacturing technology, which is now beginning to find application in the automotive and aerospace industries due to the economic potential of the micro-factory paradigm. Micro-scale mechanical manufacturing p ....etc

[:=Read Full Message Here=:]

Multi-Input Inverter for Grid-Connected
Hybrid PV/Wind Power System
Y.-M. Chen, S.-C Hung, (2.4.C heng, and Y.-CL.i u
Power Electronics Applied Research Laboratory
(PEARL)
Department of Electrical Engineering
National Chug Cheng University
Ming-Hsiung, Chia-Yi, Taiwan



ABSTRACT

The objective of this paper is to propose a novel multi-input inverter for the grid-connected hybrid PVlwind power system in order to simplify the power system and reduce the cost. The proposed multi-input inverter ....etc

[:=Read Full Message Here=:]

BY
SALAHU, AJADI SALIU
Abstract
This research work attempt to study resources allocation and coordination in a grid computing environment, a task that requires the knowledge of the User s requirements, resources capabilities, and other economics criteria for effective and efficient utilization of computer resources. The more precise the allocation of resources process the more efficient the resources utilization, i.e. user satisfaction and also to provide economic benefits to the providers.. This research work ....etc

[:=Read Full Message Here=:]

operation and control of single phase micro sources in a utility connected grid

Abstract

This paper proposes operation and control of converter based single phase distributed generators (DG) in a utility connected grid. A common utility practice is to distribute the household single-phase loads evenly between the three phases. The voltage unbalance between the phases remains within a reasonable limit. However the voltage unbalance can be severe if single-phase rooftop mounted PVs are distributed randomly between the households. Moreover, ther ....etc

[:=Read Full Message Here=:]

DEVELOPMENT OF A GRID-CONNECTEDED WIND/PV/BESS HYBRID DISTRIBUTED GENERATION SYSTEM

ABSTRACT
This article describes a grid-connected hybrid distributed generation system,
composed of PV(photovoltaic) array, wind turbine and battery. It can be used for various power distribution functions to the grid. normal operation,
power dispatching, and power averaging are the various operation modes of the system. The mode is changed according to the System) and grid inverter. For the maximum use of the renewable energy, PV array and ....etc

[:=Read Full Message Here=:]