for more info about Electro chemical machining and LBM

the Electrochemical machining (ECM) is a method of removing metal by an electrochemical process. It is normally used for mass production and is used for working extremely hard materials or materials that are difficult to machine using conventional methods. Its use is limited to electrically conductive materials. ECM can cut small or odd-shaped angles, intricate contours or cavities in hard and exotic metals, such as titanium aluminides, Inconel, Waspaloy, and high nickel, cobalt, a ....etc

[:=Read Full Message Here=:]

Please provide with the patient discharge process in india ppt ....etc

[:=Read Full Message Here=:]

Finite-Element Simulation of Electrical Discharge Machining (EDM) Process


I. INTRODUCTION
Electric discharge machining (EDM), sometimes
colloquially also referred to as spark machining, spark
eroding, burning, die sinking or wire erosion, is a
manufacturing process whereby a desired shape is obtained
using electrical discharges (sparks). Material is removed
from the workpiece by a series of rapidly recurring current
discharges between two electrodes, separated by a dielectri ....etc

[:=Read Full Message Here=:]

To get full information or details of cryogenic machining pdf please have a look on the pages

http://seminarsprojects.net/Thread-cryogenic-cooling-in-machining-processes

if you again feel trouble on cryogenic machining pdf please reply in that page and ask specific fields in cryogenic machining pdf ....etc

[:=Read Full Message Here=:]

To get full information or details of electron discharge machining please have a look on the pages

http://seminarsprojects.net/Thread-electro-discharge-machining?pid=82755

http://seminarsprojects.net/Thread-finite-element-simulation-of-electrical-discharge-machining-edm-process

http://seminarsprojects.net/Thread-electrical-discharge-machining

if you again feel trouble on electron discharge machining please reply in that page and ask specific fields in electron discharge machining ....etc

[:=Read Full Message Here=:]

Presented by
Deekshith.N.G


ELECTROCHEMICAL DISCHARGE MACHINING
ECM EDM ECDM
PRINCIPLE OF WORKING
ECM-Anodic dissolution of work
EDM-Spark errosion
ECDM-Anodic dissolution&Spark errosion
Electro chemical reaction
Passivating film
Spark errosion
EQUIPMENT
LAB ARRANGEMENT
ZZ
EQUIPMENT
Voltage-40-200V,DC
Current-3-4A
Electrolyte-semi dielectric fluids
Electrode gap-.01-1micro meters
3D tool feeder
WORKING
Anodic dissolution
Passivating film formation
Spark errosion
TO ....etc

[:=Read Full Message Here=:]

MANUFACTURING THROUGH ELECTRO CHEMICAL MACHINING

ABSTRACT:

The machining of complex shaped designs was difficult earlier, but with the advent of the new machining processes incorporating in it chemical, electrical & mechanical processes manufacturing has redefined itself. This paper intends to deal with one of the revolutionary process called Electro Chemical Machining (ECM).

INTRODUCTION:

Electro chemical machining (ECM) is the controlled removal of metal by anodic dissolution in an ....etc

[:=Read Full Message Here=:]

Electro Discharge Machining (EDM) is an electro-thermal non-traditional machining process, where electrical energy is used to generate electrical spark and material removal mainly occurs due to thermal energy of the spark. EDM is mainly used to machine difficult-to-machine materials and high strength temperature resistant alloys. EDM can be used to machine difficult geometries in small batches or even on job-shop basis. Work material to be machined by EDM has to be electrically conductive. EDM is sometimes called spark machining because it r ....etc

[:=Read Full Message Here=:]

Manufacturing of the intricate machines has taken a new dimension with the introduction of the innovative process of chemical, electrical and mechanical methods. Electrochemical machining (ECM) is a groundbreaking technology, for the development of complicated machines. ....etc

[:=Read Full Message Here=:]

Presented by: Kulkarni Aniket P.




Introduction
The cooling applications in machining operations play a very important role and many operations cannot be carried out efficiently without cooling.
Application of a coolant in a cutting process can increase tool life and dimensional accuracy, decrease cutting temperatures, surface roughness and the amount of power consumed in a metal cutting process .
Thus, it become mandatory to use coolant in machining operations.

Cutting fl ....etc

[:=Read Full Message Here=:]