Sine wave can be generated using a Microcontroller by sending amplitude values of sine wave from microcontroller to a Digital to Analog Converter(DAC), then passing the output of DAC through a op-amp to get voltage signal and finally filtering the op-amp output voltage to get smooth sine wave. This method can be used with any microcontroller such as 8051, PIC, AVR etc.
The microcontroller stores the amplitude values corresponding to the sine wave. This discrete amplitude value are sent in parallel to a DAC. If for example 8 bit microcontrolle ....etc

[:=Read Full Message Here=:]

The are many cool sensors available now a days, ranging from IR distance sensor modules, accelerometers, humidity sensors, temperature sensors and many many more(gas sensors, alcohol sensor, motion sensors, touch screens). Many of these are analog in nature. That means they give a voltage output that varies directly (and linearly) with the sensed quantity. For example in LM35 temperature sensor, the output voltage is 10mV per degree centigrade. That means if output is 300mV then the temperature is 30 degrees. In this tutorial we will learn how ....etc

[:=Read Full Message Here=:]

Design of ADC/DAC card and Interfacing With 8085 Microprocessor

Submitted By:
Pulkit Jain
Prateek Bhansali
Rocky Gupta




Abstract:
In this project we attempt to design a simple ADC/DAC card which can be easily interfaced with 8085 microprocessor kit for Data Acquisition(DAQ) purposes. We extent our work by designing a pcb

APPLICATION:
Commerical ADC/DAC cards can cost hundreds of dollars, not viable for teaching purposes. This ADC/DAC card, which is much cheaper can be used ....etc

[:=Read Full Message Here=:]

DAC and ADC converters

-Data Converter impacts the factor for the performance of the overall radio design
-Requirements: very high sampling rates, high number of effective quantization bits, an operating bandwidth of several Ghz, a large spurious-free dynamic range, a reasonable price
-DAC and ADC converters
-Sampling and Quantization
-Nyquist Zones
-Aliasing
-Bandpass filtering uses image to translate bandpass signals to baseband
-Errors occurs in Quantization
-Quantization Noise
-O ....etc

[:=Read Full Message Here=:]

What is DAC? Digital to analog converter (DAC) is used to get analog voltage corresponding to an input digital data. Data in binary digital form can be converted to corresponding analog form by using a R-2R ladder (binary weighted resistor) network and a summing amplifier. It is more common and practical. Below is the circuit and output simulated waveform of R-2R ladder network DAC. This circuit also uses an op amp (741) summing amplifier circuit.
You can learn how to build a Digital to Analog converter using the simple technique explained in ....etc

[:=Read Full Message Here=:]

I am designing an AM receiver with these components, active antenna,RF amplifier, BP filter ADC,Microprocessor(8051), DAC, audio amplifier and a speaker. the DSP part is really challenging me.I am aiming at using FIR filter, a program to processed by 8051 being interfaced by adc and dac! Any help is highly welcome! ....etc

[:=Read Full Message Here=:]

To get full information or details of adc and dac interfacing with 8085 lecture notes pdf please have a look on the pages

https://scribddoc/46940503/Microprocessor-Lab-Manual-Final

if you again feel trouble on adc and dac interfacing with 8085 lecture notes pdf please reply in that page and ask specific fields in adc and dac interfacing with 8085 lecture notes pdf ....etc

[:=Read Full Message Here=:]

is any DAC tthat can be sed to see data coming from portb of 16f73 in oscilloscope??? ....etc

[:=Read Full Message Here=:]

hi..
my project topic impact of sampling jitter in uwb communication. using matlab of 7.6..i want project ideas . existing work and proposed work of uwb in my paper.. full report also.. ....etc

[:=Read Full Message Here=:]

Detailed description about dac interfacing with 8051 microcontroller ....etc

[:=Read Full Message Here=:]