PRISM Coupling and I/O System



Insures data coupling exchanges between any two component models either directly or via or the transformer including repartitioning with MPI1 or MPI2
Insures data input/output from/to files
=>Switch between coupling exchanges
and input/output is:
indicated by the user in a coupling configuration file (XML)
transparent for the component model
managed automatically by the PSMILe

Different classes of primitives insuring:

The Startup p ....etc

[:=Read Full Message Here=:]

Design and size recommendations

The goal in designing the flange coupling is designed to optimize the number and size of bolts for flange couplings and flange dimensions. The number of bolts must be at least six.
Soles-supergrip bolt designed for maximum voltage shift of 280 n/mm2 and a maximum axial voltage of 350 n/mm2.
Design of torque
Design of torque shall be determined in accordance with
TD = TN S .. (1)
The shock factor may be selected from the table.
Number of soles-Supergrip bolts
Start by assuming the size of the bolt, then deter ....etc

[:=Read Full Message Here=:]

design and fabrication of pneumatic auto feed drilling machiner eport

abstract

in small-scale industries and automobile maintenance shops, there are frequent needs of
tightening and loosening of screws, drilling, boring, grinding machine. huge and complicated
designed parts cannot be machined with the help of an ordinary machine and further for every
operation separate machine is required therefore increasing the number of machines required and
increasing the area required for them to be accommodated and hence overall initial cost req ....etc

[:=Read Full Message Here=:]

to get information about the topic current sensor full report ppt and related topic refer the page link bellow

http://seminarsprojects.net/Thread-universal-current-sensor-full-report

http://seminarsprojects.net/Thread-magneto-optical-current-transformer-moct

http://seminarsprojects.net/Thread-universal-current-sensor-full-report--45818?pid=94351#pid94351 ....etc

[:=Read Full Message Here=:]

To get information about flange coupling design refer the page link below

http://seminarsprojects.net/Thread-design-of-flange-coupling-ppt ....etc

[:=Read Full Message Here=:]

MODEL ANALYSIS ON PROPOSED COUPLING AND DESIGN OPTIMIZATION
ABSTRACT
The energy crisis has created a booming demand for large industrial engines that are efficient, powerful, and sturdy. But husky engines, especially diesels, can easily induce destructive vibrations in driven machinery such as generators, pumps, or marine propulsion systems. Large industrial engines tend to produce high firing pressures that produce impulsive turning forces on the crankshaft. These forces, in turn, can set up severe torsional vibrat ....etc

[:=Read Full Message Here=:]

Abstract

The differential pressure method is widely used nowadays for air leak detection. In this method, a master tank, which is leak-tight, a tested tank are simultaneously charged to a certain pressure and then closed off each other. If there is air leak in the tested tank, the air leak can be detected from the different pressure occurs between the two tanks. Since both tanks temperature is inconsistent in detection process will lead to changes in pressure affect the detection precision. Although, if the tested tank is leak-tight. This ....etc

[:=Read Full Message Here=:]

Abstract

Closed-loop servo control of a DC motor and load system using tachometer feedback is a very common industrial and research application. In the presence of finite shaft stiffness, this exercise becomes involved since flexibility introduces resonance and shaft ringing. To be able to model, predict, and eliminate these high-frequency resonance problems by means of an appropriate controller design, it is essential to have an accurate model for the entire drive system, including the tachometer.

The conventional tachometer model does n ....etc

[:=Read Full Message Here=:]

Design and size recommendations

The goal in designing the flange coupling is designed to optimize the number and size of bolts for flange couplings and flange dimensions. The number of bolts must be at least six.
Soles-supergrip bolt designed for maximum voltage shift of 280 n/mm2 and a maximum axial voltage of 350 n/mm2.
Design of torque
Design of torque shall be determined in accordance with
TD = TN S .. (1)
The shock factor may be selected from the table.
Number of soles-Supergrip bolts
Start by assuming the size of the bolt, then deter ....etc

[:=Read Full Message Here=:]

download the ppt on design and fabrication of tyre coupling pdf

ABSTRACT

Mild steel or wrought iron shaft are available in lengths varying from 6 to 10 meters, so as to make them handy and easy to transport. More lengthy shafts cannot be manufactured in a correct form to be used for power transmission. In engineering practice shafts of large lengths are required to transmit the torque which can be obtained by joining two or more shafts in order to obtain the required length. The joining of shafts is done by device is called as coupling.Tyre c ....etc

[:=Read Full Message Here=:]