Electro Discharge Machining (EDM) is an electro-thermal non-traditional machining process, where electrical energy is used to generate electrical spark and material removal mainly occurs due to thermal energy of the spark. EDM is mainly used to machine difficult-to-machine materials and high strength temperature resistant alloys. EDM can be used to machine difficult geometries in small batches or even on job-shop basis. Work material to be machined by EDM has to be electrically conductive. EDM is sometimes called spark machining because it r ....etc

[:=Read Full Message Here=:]

ABSTRACT
High intensity discharge lamp (HID) presently used for urban street light are based on principle of gas discharge, thus the intensity is not controllable by any voltage reduction method as the discharge path is broken. White Light Emitting Diode (LED) based lamps are soon replacing the HID lamps in street light. Thus intensity control is now possible by pulse width modulation based on sensing the movement and density of vehicles. The pulse width becomes very narrow on sensing no movement of vehicles. As the ....etc

[:=Read Full Message Here=:]

To get full information or details of electron discharge machining please have a look on the pages

http://seminarsprojects.net/Thread-electro-discharge-machining?pid=82755

http://seminarsprojects.net/Thread-finite-element-simulation-of-electrical-discharge-machining-edm-process

http://seminarsprojects.net/Thread-electrical-discharge-machining

if you again feel trouble on electron discharge machining please reply in that page and ask specific fields in electron discharge machining ....etc

[:=Read Full Message Here=:]

Presented by
Deekshith.N.G


ELECTROCHEMICAL DISCHARGE MACHINING
ECM EDM ECDM
PRINCIPLE OF WORKING
ECM-Anodic dissolution of work
EDM-Spark errosion
ECDM-Anodic dissolution&Spark errosion
Electro chemical reaction
Passivating film
Spark errosion
EQUIPMENT
LAB ARRANGEMENT
ZZ
EQUIPMENT
Voltage-40-200V,DC
Current-3-4A
Electrolyte-semi dielectric fluids
Electrode gap-.01-1micro meters
3D tool feeder
WORKING
Anodic dissolution
Passivating film formation
Spark errosion
TO ....etc

[:=Read Full Message Here=:]

I need information on 3D electrochemical micromachining setup please.. ....etc

[:=Read Full Message Here=:]

I want information about electrochemical coagulation technology for treatment of hospital waste water.. ....etc

[:=Read Full Message Here=:]

Finite-Element Simulation of Electrical Discharge Machining (EDM) Process


I. INTRODUCTION
Electric discharge machining (EDM), sometimes
colloquially also referred to as spark machining, spark
eroding, burning, die sinking or wire erosion, is a
manufacturing process whereby a desired shape is obtained
using electrical discharges (sparks). Material is removed
from the workpiece by a series of rapidly recurring current
discharges between two electrodes, separated by a dielectri ....etc

[:=Read Full Message Here=:]

hi.. 'm Karthik doin environmental engineering final year.. 'm student of Sri Jayachamarajendra College of Engineering,Mysore.i here by request for the report ofELECTROCHEMICAL COAGULATION (ECC) TECHNOLOGY FOR TREATMENT OF HOSPITAL WASTEWATER.. ....etc

[:=Read Full Message Here=:]

Please provide with the patient discharge process in india ppt ....etc

[:=Read Full Message Here=:]

sounds nice project title..
wanna read more rather in detail ....etc

[:=Read Full Message Here=:]