to get information about the topic cutting parameters of turning full report ppt and related topic rfer the page link bellow

http://seminarsprojects.net/Thread-optimization-of-machining-parameters-in-cnc-turning-of-martensitic-stainless-steel

http://seminarsprojects.net/Thread-investigation-of-cutting-parameters-of-surface-roughness-for-a-non-ferrous-material

http://seminarsprojects.net/Thread-cutting-parameters-optimization-for-the-wire-edm-process-using-continuous-ants-colo

http://seminarsprojects.net/Thread-optimization-of-mach ....etc

[:=Read Full Message Here=:]

This seminar presents the manufacturing processes of thermoplastic structures including piezoceramic patches (PZT). The objective of the study reported here was to find a trade-off between the manufacturing conditions and the thermal endurance of the PZT patches. We studied the influence of high temperatures on the PZT efficiency during manufacturing. Two processes were considered: injection molding and thermoforming. The studied object consists of a polypropylene plate containing a PZT patch integrated at different positions. On the one hand, ....etc

[:=Read Full Message Here=:]

ABSTRACT

This paper describes in detail, field experiments performed on a single-phase, distribution transformer to study the behavior of transformer terminal parameters during internal winding faults. A custom-built transformer provided with external taps was used for these tests. The taps were used to stage various internal winding faults in the transformer. Terminal values of voltages and currents were monitored and the results presented. A comparison of these results with simulation results is also presented


Presented By:
Palme ....etc

[:=Read Full Message Here=:]

Presented By:
santosh
anakapalle.


ABSTRACT
Solar panel converts the light energy from the sun into electrical energy. In ordinary solar panel systems, the solar panel is fixed in a particular direction. The solar panel delivers maximum energy only when it faces directly towards the sun. Since the sun is moving continuously, the solar panel cannot deliver maximum energy when the solar panel fixed at one direction.
The goal of the project is to control the solar panel continuously, according to the moveme ....etc

[:=Read Full Message Here=:]

Abrasive Jet Machine

Introduction
Abrasive jet machining (AJM) is a non-traditional machining
process that can machine material without generating heat and
shock.
Abrasive jet machining (AJM) is commonly used for Cutting,
Cleaning, Drilling and Etching operation

Mechanism of AJM

Fine particles are accelerated in
gas stream .

The particles are directed towards
the focus of machining.

As the particle impacts the surface,
it causes a small fractu ....etc

[:=Read Full Message Here=:]

Modern home with optimum energy conservation



ABSTRACT

Now a day s technology increasing rapidly recently it is affecting home needs also. To make normal home to modern home we are introducing some luxury facilities like we can operate any of the electronic devices like FAN LIGHT AC with our T.V remote. For this application we are using AT-mega8 Micro controller which is heart of this project. Fallowing to microcontroller we are also using relays to operate AC appliances.
The Block diagram of the system ....etc

[:=Read Full Message Here=:]

PROJECT GUIDE :
Dr.K.RAMANATHAN

Presented by:
K.KARTHIKEYAN




Abstract

Titanium nitride (TiN) is an extremely hard ceramic material, often used as a coating on titanium alloys, steel, carbide, and aluminium components to improve the substrate's surface properties.

Applied as a thin coating, TiN is used to harden and protect cutting and sliding surfaces, for decorative purposes (due to its gold appearance), and as a non-toxic exterior for medical implants.

TiN coating is for edge retention and corrosion r ....etc

[:=Read Full Message Here=:]

Determination of Optimum Process Parameters during turning of AISI 304



Introduction and literature survey

In machining process, Surface finish is one of the most significant technical requirements of the customer. A reasonably good surface finish is desired to improve the tribological properties, fatigue strength, corrosion resistance and aesthetic appeal of the product. Nowadays, manufacturing industries specially concerned to dimensional accuracy and surface finish. In order to obtain optimal cutting pa ....etc

[:=Read Full Message Here=:]

1.ഏത് ഉടമ്പടി സ്ഥാപിക്കാൻ മുൻകൈയെടുത്തതിനാണ് തിയോഡർ റൂസ്വെൽറ്റിന് നൊബേൽ സമ്മാനം നൽകിയത്?
*Russo-Japanese Treaty
 
2. ....etc

[:=Read Full Message Here=:]

to get information about the topic cutting parameters in cnc turning using full factorial method related topic rfer the page link bellow

http://seminarsprojects.net/Thread-optimization-of-machining-parameters-in-cnc-turning-of-martensitic-stainless-steel

http://seminarsprojects.net/Thread-investigation-of-cutting-parameters-of-surface-roughness-for-a-non-ferrous-material

http://seminarsprojects.net/Thread-cutting-parameters-optimization-for-the-wire-edm-process-using-continuous-ants-colo

http://seminarsprojects.net/Thread-optimization-of ....etc

[:=Read Full Message Here=:]