INTRODUCTION
An Injection molding machine, also known as an injection press, is a machine for manufacturing plastic products by the injection molding process. It consists of two main parts, an injection unit and a clamping unit.
Injection molding machines can fasten the molds in either a horizontal or vertical position. The majority of machines are horizontally oriented, but vertical machines are used in some niche applications such as insert molding, allowing the machine to take advantage of gravity. There are many ....etc

[:=Read Full Message Here=:]

A BRIEF STUDY ON PLASTIC INJECTION MOLDING PROCESS

ABSTRACT:

Injection molded components are consistently designed to minimize the design and manufacturing information content of the enterprise system. The resulting designs, however, are extremely complex and frequently exhibit coupling between multiple qualities attributes. Axiomatic design principles were applied to the injection molding process to add control parameters that enable the spatial and dynamic decoupling of multiple quality attributes in the m ....etc

[:=Read Full Message Here=:]

How to choose plastic injection molding machine

How to choose plastic injection molding machine
Typically, the important factors when choosing plastic injection molding
machine include mold, product, molding requirements and so on. Therefore,
you must collect or have the following information before making a choice:
mold dimension (width, height, thickness), weight and special design; types
and amount of the plastic (single or multiple plastic materials); dimensions
and weight of injection molding product (length, width, heigh ....etc

[:=Read Full Message Here=:]

PLASTIC INJECTION MOLDING PROCESS



ABSTRACT:

Injection molded components are consistently designed to minimize the design and manufacturing information content of the enterprise system. The resulting designs, however, are extremely complex and frequently exhibit coupling between multiple qualities attributes. Axiomatic design principles were applied to the injection molding process to add control parameters that enable the spatial and dynamic decoupling of multiple quality a ....etc

[:=Read Full Message Here=:]

i want report for injection moulding,please give me information about it.
please send me report for injection moulding ....etc

[:=Read Full Message Here=:]

injection moulding defects in plastic ppt pdf

. Description
A molded product that is incomplete because the mold cavity was not filled completely.
. Causes
Insufficient injection-molding machine performance (shot capacity, plasticizing capacity, etc.)
Poor material flowability
Gate cross-section surface area is too small. Molded product thickness is too thin.
Poor gas venting.
. Countermeasures

Increase the amount of material feed. If material feed is still insufficient at maximum material feed capacity, change to a l ....etc

[:=Read Full Message Here=:]

Abrasive Jet Machine

Introduction
Abrasive jet machining (AJM) is a non-traditional machining
process that can machine material without generating heat and
shock.
Abrasive jet machining (AJM) is commonly used for Cutting,
Cleaning, Drilling and Etching operation

Mechanism of AJM

Fine particles are accelerated in
gas stream .

The particles are directed towards
the focus of machining.

As the particle impacts the surface,
it causes a small fractu ....etc

[:=Read Full Message Here=:]

PROJECT GUIDE :
Dr.K.RAMANATHAN

Presented by:
K.KARTHIKEYAN




Abstract

Titanium nitride (TiN) is an extremely hard ceramic material, often used as a coating on titanium alloys, steel, carbide, and aluminium components to improve the substrate's surface properties.

Applied as a thin coating, TiN is used to harden and protect cutting and sliding surfaces, for decorative purposes (due to its gold appearance), and as a non-toxic exterior for medical implants.

TiN coating is for edge retention and corrosion r ....etc

[:=Read Full Message Here=:]

Determination of Optimum Process Parameters during turning of AISI 304



Introduction and literature survey

In machining process, Surface finish is one of the most significant technical requirements of the customer. A reasonably good surface finish is desired to improve the tribological properties, fatigue strength, corrosion resistance and aesthetic appeal of the product. Nowadays, manufacturing industries specially concerned to dimensional accuracy and surface finish. In order to obtain optimal cutting pa ....etc

[:=Read Full Message Here=:]

Plastic Injection Molding



Plastic Injection Molding

It is a manufacturing technique for making parts from thermoplastic and thermoset materials
In contrast to the extrusion (which makes continuous parts of constant cross section), injection molding make discrete parts (with complex and variable cross section)
Molten plastic is injected at high pressure into a mold, which is the inverse of the desired shape.
The mold is made from metal, usually either steel or aluminium
Wi ....etc

[:=Read Full Message Here=:]