SKYBUS METRO INTRODUCTION
The Skybus project was envisioned while looking at the pathetic roadcondition created by the metro infrastructure put in place on the wide roads whichhas caused enormous hardship and delays, traffic jams for the daily road users. Theconcept of metro as the solution to the city traffic jams as well as to handle large people movement from one area of the city to the other end seems very bright whenlooked upon from the surface level, whereas in reality people who owned the cars aswell as the public transport bus system o ....etc

[:=Read Full Message Here=:]

knuckle joint design and calculations

Knuckle joints may be cast or fabricated or forged. In the knuckle joint illustrated, the rods are integral with the eye and fork (forged construction). However, the knuckle joint is often separate to the rods, and the rods need to be welded or screwed into the eye and fork. In the knuckle joint illustrated, there is no separate bearing and rotational or motion occurs between the pin and eye or pin and fork or both. If there is considerable movement, it may be necessary to use bearings to minimise fricti ....etc

[:=Read Full Message Here=:]

A dog clutch, if successfully implemented in an automatic transmission, provides better packaging and the potential for improved fuel economy. The technical requirements for this concept are examined through modeling and simulation. As a first step, a physics-based component level model is developed that provides an understanding of the basic contact and impact dynamics. The model is compared to a built-in AMESim block to establish confidence. This component level model is then integrated into a powertrain system model within the AMESim environ ....etc

[:=Read Full Message Here=:]

i need the abstract and base paper for automatic stamping machine project ....etc

[:=Read Full Message Here=:]

Product Description:
The machine model ST-15 is used for heat transfer, this machine is used for flat and round. This machine has wide acceptance in for flat items such as pencil box, lunch box, serving tray.Many more in flats surface and on round products container.

Technical Specifications
Speed controller
Digital temperature controller
Digital timer
Double nomatic cylinder
Wastage winding motor
Foot switch
Fsto pneumatic cylinder & valves
Ejector for round products
Heater=2000watts
Voltage supply=220 v
Dimension (L ....etc

[:=Read Full Message Here=:]

please provide me some necessary details about the calculation of slider crank mechanism ....etc

[:=Read Full Message Here=:]

Progressive Automation In Industry Over The Last Century Is The Result Of Human Desire For Freedom From Drudgery. Automatic Stamping Machine Is One Of The Useful Machine In Many Kind Of Organization Like University, Government Office, Post Office, Banks Etc. Currently In Many Organization Man Or Women Appointed For Stamping Job ,so Our Stamping Machine Does The Same Work As Man Or Women Appointed For Such Stamping Machine. This Machine Automatically Does The Operation Like Detection Of Paper ,rolling Of Next Paper, Auto Filling Of Ink Etc. To O ....etc

[:=Read Full Message Here=:]

This system works in two modes
1. stamp position adjustment mode
While this mode we can adjust the position of stamp carriage on the paper wherever we want

2. stamping mode
During this mode machine work in automatic process it accepts paper give impression of stamp and collect paper with paper out mechanism

Mode switching selection is carried out by one SPDT slide switch connected to A1 pin of the arduino ....etc

[:=Read Full Message Here=:]

abstract on automatic stamping machine project report

A stamping press is a metalworking machine tool used to shape or cut metal by deforming it with a die.Stamping (also known as pressing) is the process of placing flat sheet metal in either blank or coil form into a stamping press where a tool and die surface forms the metal into a net shape. Stamping includes a variety of sheet-metal forming manufacturing processes, such as punching using a machine press or stamping press, blanking, embossing, bending, flanging, and coining. This could b ....etc

[:=Read Full Message Here=:]

rcc storage tank design for 1000 mt of material storage
material specific gravity is 1600 kg/m3 ....etc

[:=Read Full Message Here=:]