need a ppt on the seminar topic
CORROSION CONTROL OF UNDERWATER PILES ....etc

[:=Read Full Message Here=:]

Abstract
Corrosion is one of the serious problem affecting airforce and other aviation industries. It affects the aircraft on its wings, surface, between joints and fasteners. The presences of corrosion underneath the paints of surface and between joints are not easy to be detected. The unnoticed presence of corrosion may cause the aircraft to crash leading to human and money loses.

To detect the corrosion present on the metal surface, various methods and tests are used. These tests conducted should be such that it does not destroy or disassem ....etc

[:=Read Full Message Here=:]

INTRODUCTION
CAUSE OF CORROSION MOISTURE, WATER, CRACKS
AREAS AFFECTED SURFACE, LAP JOINTS, FASTENERS
3. NEED OF NDT
NON DESTRUCTIVE TESTS (NDT)
VISUAL INSPECTION
MAGNETIC PARTICLE TEST
LIQUID (DYE) PENITRATION TEST
X RAY PENETRATION INSPECTION
EDDY CURRENT INSPECTION
ULTRASONIC INSPECTION
DEFECTS OF CONVENTIONAL SYSTEMS
INSPECTION FROM TOP NORMAL TO SURFACE
2. TIME CONSUMING FOR POINT TO POINT INSPECTION
3. INABILITY TO DETECT (a) DISBONDS IN MULTILAYER
(b) FATIGUE CRACKS AT ....etc

[:=Read Full Message Here=:]

control of corrosion on underwater pile..



:::dodgy::dodgy:
control of corrosion on underwater pile..
....etc

[:=Read Full Message Here=:]

control of corrosion on underwater piles ppt

ABSTRACT

Piles are structures used to transfer loads from superstructure to the sub surface strata. When the subsurface stratum is water based or if we deal with a hydraulic structure, the piles are to be driven into water and under water strata. Piles used in underwater structures are often subjected to corrosion. There is no absolute way to eliminate all corrosion; but corrosion protection measures are employed to control the effect of corrosion. Corrosion protection can be in different ways ac ....etc

[:=Read Full Message Here=:]

advance formwork techniques ppt

Building a high rise, or other large buildings, is typical for urban areas. High-rise buildings are rapidly becoming a developing nature of urban zones due to increased population and businesses. The core of high-rise buildings is one of the most important elements in such gigantic structures. Fast and efficient construction of the concrete core of a high-rise building is essential to maintain phased progress on other parts of the building. Formwork is one of the most important factors in determining the success ....etc

[:=Read Full Message Here=:]

1. CONTROL OF CORROSION OF UNDERWATER PILES Presented by: Avinash Shaw Roll no. 11/CE/45 Department of Civil Engineering NIT Durgapur
2. Introduction Corrosion is the destruction of metals and alloys by the chemical reaction with the environment. Generally many traditional metal parts are used with lighter polymeric components but these are impervious to electrochemical corrosion so even with the proper selection of base metals, there is no absolute way to eliminate corrosion.
3. On steel piling in seawater, the more chemically active surface ....etc

[:=Read Full Message Here=:]

Detection of corrosion damage in aircraft wing skin structures is an ongoing NDT challenge. Ultrasonic methods are known and well-accepted techniques, which are relatively simple to carry out in terms of setup, probes and instrumentation and operator training. However, with conventional inspection from the top surface using a transducer at normal incidence (0o to the normal to the surface) producing a visual picture in the form of a C-scan, it is very tie consuming to point-by-p ....etc

[:=Read Full Message Here=:]

Abstract

Civil engineers are now-a-days being offered a variety of reinforcing steels to resist corrosion of steel in concrete. Two in particular, CRS and MMFX , will be discussed in this write-up However, the author stresses that reinforced concrete construction professionals need to refocus their attention on concrete, the material they know best, rather than on the metallurgical mysteries expounded by specialists from another discipline. After all, as every civil engineer worth his salt knows, concrete is the first line of defence in th ....etc

[:=Read Full Message Here=:]

Ultrasonic Techniques for hidden corrosion detection
Introduction
Corrosion is one of the serious problem affecting airforce and other aviation industries. It affects the aircraft on its wings, surface, between joints and fasteners. The presences of corrosion underneath the paints of surface and between joints are not easy to be detected. The unnoticed presence of corrosion may cause the aircraft to crash leading to human and money loses. To detect the corrosion present on the metal surface, various method ....etc

[:=Read Full Message Here=:]