Mini project report on
PLANER MILLING MACHINE ACCOMMODATED WITH DRILL HEAD

INTRODUCTION:
What is Planer-milling machine?

Planers and shapers are now obsolescent, because milling machines have eclipsed them as the machine tools of choice for doing work, as the rate of metal removal is quantitative.
planer-milling machines come in two kinds: double-housing and open-side. The double-housing variety has vertical supports on both sides of its long bed; the open-side variety has a vertical support on only one side, al ....etc

[:=Read Full Message Here=:]

to get information about the topic DESIGN AND FABRICATION OF TOOL HOLDER SETUP FOR PORTABLE PLANER full report ,ppt and related topic refer the page link bellow

http://seminarsprojects.net/Thread-desgin-and-fabrication-of-spring-rolling-machine ....etc

[:=Read Full Message Here=:]

download mechanical seminar on shaper machine ppt

Abstract
The shaper is a reciprocating type of machine tool intended primarily to produce flat surfaces. These surfaces may be horizontal, vertical, or inclined. In general, the shaper can produce any surface composed of straight line elements. Modern shapers can generate contoured surface.

The metal working shaper was developed in the year 1836 by James Nasmyth an, Englishman.

Types Of Shapes
Shapers are classified in number of ways depending upon the general features of design or the purpos ....etc

[:=Read Full Message Here=:]

introduction
types of shaper
principal parts of shapr
shaper mechanism
methods of shaper mechanism
feed mechanism
work holding devices
shaper operations
shaper tools
cutting speed , feed & depth of cut ....etc

[:=Read Full Message Here=:]

ppt of milling attachment of lathe

BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools, a drill press and lathe, are needed to make the attachment.
Shown mounted on the cross slide of a lathe ,the attachment features a swivel baseand tilting slide which has T-slots for clampingthe work securely in place. Although this attachment was made for a 7-in. Atlas lathe, the
overall dimensions could be increased 25% for use with a 9 or 10-in ....etc

[:=Read Full Message Here=:]

To get full information or details of slotter machine ppt please have a look on the pages

http://seminarsprojects.net/Thread-milling-slotting-attachment-on-lathe-machine?pid=22180

if you again feel trouble on slotter machine ppt please reply in that page and ask specific fields in slotter machine ppt ....etc

[:=Read Full Message Here=:]

hai i want the seminar topic about shapermachine with ppt.this is very useful for me ....etc

[:=Read Full Message Here=:]

Abstract
The shaper is a reciprocating type of machine tool intended primarily to produce flat surfaces. These surfaces may be horizontal, vertical, or inclined. In general, the shaper can produce any surface composed of straight line elements. Modern shapers can generate contoured surface.

The metal working shaper was developed in the year 1836 by James Nasmyth an, Englishman.

Types Of Shapes
Shapers are classified in number of ways depending upon the general features of design or the purpose for which they are intended. Shapers are classifi ....etc

[:=Read Full Message Here=:]

of quick return mechanism in shaper machine in ppt presentation
Introduction

The Whitworth quick return mechanism converts rotary motion into reciprocating motion, but unlike the crank and slider, the forward reciprocating motion is at a different rate than the backward stroke. At the bottom of the drive arm, the peg only has to move through a few degrees to sweep the arm from left to right, but it takes the remainder of the revolution to bring the arm back. This mechanism is most commonly seen as the drive for a shaping machine.

Constructio ....etc

[:=Read Full Message Here=:]

please send me some information on shaper tool head . ....etc

[:=Read Full Message Here=:]