Hey guys?can u tell help me in giving me methods of reducing leakage flux in transformers?

Thx ....etc

[:=Read Full Message Here=:]

i want flux meter ppt, and it's construction and it's basic principal of it..
please provide me that.. ....etc

[:=Read Full Message Here=:]

FLUX ESTIMATORS FOR SPEED-SENSORLESS
INDUCTION MOTOR DRIVES



Abstract

This thesis deals with flux estimators for speed-sensorless induction motor drives. To enhance
the stability and the performance of state-of-the-art sensorless drives, new flux estimator
designs based on the standard motor model are proposed. Theoretical and experimental
research methods are both used. The dynamics and stability of flux estimators
are analyzed using linearized models, and the effects of parameter errors are investig ....etc

[:=Read Full Message Here=:]

This article is presented by:
O. Barambones , A.J. Garrido , F.J. Maseda and P. Alkorta Speed Sensorless Vector Control of Induction Motors Based on
Robust Adaptive Variable Structure Control Law

ABSTRACT
A novel sensorless adaptive robust control law is proposed to improve the trajectory tracking performance of induction motors. The proposed design employs the so called vector (or field oriented) control theory for the induction motor drives and the designed contro ....etc

[:=Read Full Message Here=:]

CHAIN DRIVES IN LOW TORQUE DRIVES AND REDUCING PULSATIONS
INTRODUCTION TO DRIVES

Mechanical components used for power transmission. It may be belt, chain or gear depending on engine design parameters like - Distance between crankshaft and camshaft, engine maximum speed, engine-torque and engine construction cost. - Power transmission is done from one shaft to another shaft which may or may not rotate at same speed.

CHAIN DRIVES ....etc

[:=Read Full Message Here=:]

A Robust Sensorless Direct Torque Control of Induction Motor Based on MRAS and Extended Kalman Filter
Presented By:
Mustapha MESSAOUDI, Habib KRAIEM, Mouna BEN HAMED, Lassaad SBITA and Mohamed Naceur ABDELKRIM

Abstract
In this paper, the classical Direct Torque Control (DTC) of Induction Motor (IM) using an open loop pure integration suffers from the well-known problems of integration especially in the low speed operation range is detailed. To tackle this problem, the IM variables and parameters estimation is per ....etc

[:=Read Full Message Here=:]

please sir send me the sensorless induction motor ppt ....etc

[:=Read Full Message Here=:]

difference between chopper fed drives and converter fed drives pdf

If the source of supply is d.c. (for example in a battery vehicle or a rapid transit system) a chopper-type converter is usually employed. The basic operation of a single-switch chopper was discussed in topic 2, where it was shown that the average output voltage could be varied by periodically switching the battery voltage on and of for varying intervals. The principal difference between the thyristor-controlled rectifier and the chopper is that in the former the motor current ....etc

[:=Read Full Message Here=:]

Abstract:
The field oriented control emerged as an important approach for the control of AC machines, and continues to be explored and developed in the literature. The estimation of the rotor flux from the measurable variables was the only method used to implement the vector control of the induction machine. To replace the estimator based on the mathematical model of the system, which can lead to unintended errors due to uncertainties on the model and on the measures we use an appropriate observer.

Presented By:
Ch ....etc

[:=Read Full Message Here=:]

Development Of Basic Agglomerated Flux For Submerged Arc Welding
Deviprakash K J & Anand Krishnan O K
Department of Mechanical Engineering
Mohandas College of Engineering and Technology



Abstract
A significant percentage of the flux used in submerged are welding gets converted into very fine particles particles
termed as flux dust due to transportation and handling. If these very fine particles are not removed fromt he flux before
welding, it may results ....etc

[:=Read Full Message Here=:]