i am going to make fingerprint attendence marking, so i have need of sm630 module code.
so quickly send me.
thanks for this.. ....etc

[:=Read Full Message Here=:]

r305 fingerprint module datasheet pdf

Biometric identification from a print made by an impression of the ridges in the skin of a finger is often used as evidence in criminal investigations. Yes, now we can use the same biometric identification technique to build our own hobby projects like a biometric authenticator/access control system with the help of readily-available Fingerprint Identification Modules.

This is an optical biometric fingerprint reader/sensor (R305) module with TTL UART interface for direct connections to a microcontroller ....etc

[:=Read Full Message Here=:]

/*
*AttendenceSystem.c
*
* Created: 21/09/2015 10:02:30 PM
* Author: Otoman
*/

#define F_CPU 16000000UL // set the CPU clock
#define BAUD 57600 // define baud
#define BAUDRATE ((F_CPU)/16/BAUD-1) // set baud rate value for UBRR

#include
#include
#include

char buffer;

PortInit();
FlashLED();
Strobe();
Clear_Display();
Unpack_To_PortC(char data);
Short_Delay();
unsigned char USART_Receive();

void USART_TransmitFlag();
void USART_Transmit(unsigned char data);
void searchFinger(int bu ....etc

[:=Read Full Message Here=:]

Here is a new finger print security system project which uses R303/R305 module. A previous finger print security system project published on this site uses SM630. its available here. R305 module is almost half the price of SM630. So we are giving a new security system project with R303/R305 module.

The AT89S52 microcontroller is used in this project to control the R305 fingerprint module. The features of R305 is given below.
Power DC 4.5V-6.0V
Interface UART(TTL logical level)/ USB 1.1
Working current Typical: 100mA Peak: 150mA
Matching ....etc

[:=Read Full Message Here=:]

r305 fingerprint module interfacing with pic

This is an optical biometric fingerprint reader/sensor (R305) module with TTL UART interface for direct connections to a microcontroller UART. The user can store the finger print data in the module and can configure it in 1:1 or 1: N mode for identifying the person. This module can directly interface with any 3.3V or 5V microcontrollers, but a suitable level converter/serial adapter is required for interfacing with the serial port of a PC.

Working Principle

Fingerprint processing includes two part ....etc

[:=Read Full Message Here=:]

hello
I am using R305 fingerprint module i want know how i communicate with device with controller means what type of data i have send and what it will give and with what is time delay..

Thank you
U
pendra ....etc

[:=Read Full Message Here=:]

r305 interface with pic microcontroller c code

#include
#include

sfr ldata=0x90;
sbit rs=P2^3;
sbit rw=P2^4;
sbit en=P2^5;
sbit busy=P1^7;
sbit S1=P3^2;
sbit S2=P3^3;
sbit S3=P3^4;
//====================================================================//
void fingerprint(void);
void UARTSendByte(unsigned char,unsigned char dt );
unsigned char UARTGetByte(void);
void fingerdata(char);
void conv();
void elect();
void lcdcmd(unsigned char);
void lcddata(unsigned char);
void lcdready();
void msdelay(unsigned int);
void UARTIn ....etc

[:=Read Full Message Here=:]

Sir , i am not getting the datasheet of the module. Sir , please help me to interface r305 fingerprint module with pic16 microcontroller and also with the hyperterminal of pc. Please reply as soon as possible. THANK YOU. ....etc

[:=Read Full Message Here=:]

I am going to use fingerprint module on my final project and I want to know how to interface fingerprint module on 16ff877a microcontroller ....etc

[:=Read Full Message Here=:]

The fingerprint sensor is combination of R305 FP+PIC MCU board that can read different fingerprints and store in its own flash memory. The sensor can perform three functions namely Add(Enroll) , Empty Database or Search Database and return the ID of stored fingerprint.

Any of three functions can be called simply by making the pin low of the sensor or pressing onboard three switches. The response is either error or ok which is indicated by onboard LED. The response is also returned as single serial data byte. The return byte is a valid ID or ....etc

[:=Read Full Message Here=:]