This project is aimed at developing an online intranet knowledge mgmt system that is of importance to either an organization or a college. The system (KMS) is an Intranet based application that can be accessed throughout the organization or a specified group/Dept. This system can be used as a knowledge/information mgmt system for the college. Students/Staff logging should be able to upload any kind of technical information. Students/staffs logging in may also access/search any information put up by others. KMS should facilitate knowledge sharin ....etc

[:=Read Full Message Here=:]

to get information about the topic 3 phase alternator by synchronous impedance method related topic refer the page link bellow

http://seminarsprojects.net/Thread-regulation-of-3%E2%80%93phase-alternator-by-emf-and-mmf-methods ....etc

[:=Read Full Message Here=:]

AIM:
To predetermine the regulation of three phase alternator by Potier and ASA methods and also to draw the vector diagrams.
FORMULAE USED:
Percentage regulation = Eo Vrated x 100 (For both POTIER & ASA methods)
Vrated
PRECAUTION:
(i) The motor field rheostat should be kept in the minimum resistance position.
(ii) The Alternator field potential divider should be in the position of minimum potential.
(ii) Initially all switches are in open position.
PROCEDURE FOR BOTH POTIER AND ASA MET ....etc

[:=Read Full Message Here=:]

AIM
To conduct the slip test on three phase alternator and predetermination the regulation through vector diagrams
APPARATUS REQUIRED
PRECAUTION
1. The Motor field Rheostat should be kept in minimum resistance position.
2. The Alternator field should be kept open throughout the experiment.
3. The direction of rotation due to prime mover and due to the Alternator run as the motor should be same.
4. Initially all the switches are kept open
PROCEDURE
1. The name plate details of the motor an ....etc

[:=Read Full Message Here=:]

AIM
To conduct OC, SC and ZPF test on the three phase alternator and to predetermine the regulation of 3 phase alternator by EMF method, MMF method, & ZPF method also to verify by vector diagram.
APPARATUS REQUIRED
PRECAUTION
1. The motor field rheostat should be kept in the minimum resistance position.
2. The alternator field potential divider should be in the minimum voltage position.
3. Initially all switches are in open position.
PROCEDURE
A. OC.Test
1. Note down the name plate details ....etc

[:=Read Full Message Here=:]

to get information about the topicmgmt system related topic refer the page link bellow

http://seminarsprojects.net/Thread-online-intranet-knowledge-mgmt-system ....etc

[:=Read Full Message Here=:]

To get full information or details of conversion of brushless alternator to synchronous motor please have a look on the pages

http://seminarsprojects.net/Thread-brushless-alternators

if you again feel trouble on conversion of brushless alternator to synchronous motor please reply in that page and ask specific fields in conversion of brushless alternator to synchronous motor ....etc

[:=Read Full Message Here=:]

i need the details about how to converts brushless alternator into synchronus motor ....etc

[:=Read Full Message Here=:]

Development of a feature-rich, practical online intranet knowledge mgmt system for the college (KMS).

This project is aimed at developing an online intranet knowledge mgmt system that is of importance to either an organisation or a college. The system (KMS) is an Intranet based application that can be accessed throughout the organisation or a specified group/Dept. This system can be used as a knowledge/information mgmt system for the college. Students/Staff logging should be able ....etc

[:=Read Full Message Here=:]

THEORY:
The regulation of a 3-phase alternator may be predetermined by conducting the Open Circuit (OC) and the Sort Circuit (SC) tests. The methods employed for determination of regulation are EMF or synchronous impedance method, MMF or Ampere Turns method and the ZPF or Potier triangle method. In this experiment, the EMF and MMF methods are used. The OC and SC graphs are plotted from the two tests. The synchronous impedance is found from the OC test. The regulation is then determined at different power factors by ....etc

[:=Read Full Message Here=:]