ABSTRACT
Condition monitoring of components and plants are of great importance for safe and reliable operation and for increasing productivity of plants. The challenges towards the condition monitoring can be successfully met by employing non-destructive evaluation (NDE) techniques. Vibration monitoring techniques are applied for periodic / continuous assessment of machinery parts and plants. Acoustic emission technique is used for leak detection and for structural integrity monitoring applications. Infr ....etc

[:=Read Full Message Here=:]

Abstract
Destructive and non-destructive methods have been used for the determination of micro-traces of antimony in high-purity silicon powder. The destructive method was based on sub-stoichiometric radio-activation analysis with solvent extraction using BPHA and cupferron as organic reagents. The antimony contents in high-purity silicon can be determined by the proposed method.
A new non-destructive method was developed for the detection of refrigerant leakage at an evaporator's inflow. Nitrogen and oxygen gas were suc ....etc

[:=Read Full Message Here=:]

How to get robaastra seminar report?

How can dowload this seminar report? ....etc

[:=Read Full Message Here=:]

....etc

[:=Read Full Message Here=:]

hi. my name is bhavana.k and i'm studying in B.Tech and our project his human detection robot controlled by mobile using DTMF Technology. i need help about its application.where its used , for what purpose and i also need its ppt.
plz mail the information to me on [email protected] ....etc

[:=Read Full Message Here=:]

INTRODUCTION
The successful operation of structures / components during their entire life requires the implementation of a dedicated programme for condition assessment through in-service inspection (ISI) of all critical components of the plants / structures. The condition assessment through ISI and life prediction approaches enable uninterrupted operation, avoidance of unplanned shutdowns and taking decision on repair, up-gradation, modernization and replacement of necessary components for extension of t ....etc

[:=Read Full Message Here=:]

SYNOPSIS

Non- destructive estimation of particle size of finished products is essentially required to judge their suitability for intended applications. For this estimation, a ceramic heating element (SiC rod) of a heat Treatment furnace at 1400 Degree celcius has been chosen. The particle size has been estimated with the proposed method based on counting reflection spots in a back reflection X-Ray pattern. Calibration curve has been drawn on the basis of the data obtained by standard sieve me ....etc

[:=Read Full Message Here=:]

i wanted a complete seminar report . please help me. ....etc

[:=Read Full Message Here=:]

Non-destructive testing or non-destructive testing is a broad group of analysis techniques used in the science and technology industry to evaluate the properties of a material, component or system without causing damage. The terms non-destructive examination (NDE), nondestructive inspection (NDI) and nondestructive evaluation (NDE) are also commonly used to describe this technology. Because NDT does not permanently alter the item being inspected, it is a very valuable technique that can save money and time on product evaluation, problem solvin ....etc

[:=Read Full Message Here=:]

Android-controlled robot project make use of an Android mobile phone for robotic control with the help of Bluetooth technology. It is a simple robotic projects using micro-controller. We have already seen Mobile Controlled Robot using DTMF technology that uses call-based method to control the robot. Also many wireless robots use RF modules. The control commands available are more than RF modules. Robot controlled by Smartphone is superior to all these robots.

This project is a robot controlled by Bluetooth. To do this, the Android mobile use ....etc

[:=Read Full Message Here=:]