ITER - the way to new energy

INTODUCTION
ITER INTERNATIONAL THERMONUCLEAR EXPERIMENTAL REACTOR.
ITER is a large-scale scientific experiment that aims to produce electricity from NUCLEAR FUSION.
Q = 10 represents the scientific goal of the ITER project: to deliver ten times the power it consumes.
The same principle of sun is used to produce heat in ITER plant.

WHAT IS FUSION
Fusion is the process at the core of our Sun.
In the core of our Sun, temperatures reach 15 000 000 Celsius. H ....etc

[:=Read Full Message Here=:]

fabrication of tomato grader

At grading speeds of up to 32 units per second per lane the AirJet sizer breaks all records for volume processing whilst maintaining perfect accuracy. This turnkey solution has revolutionised the term sorting machine and provides users with an edge over competitors.

Key Benefits

Seven separate images are taken of each product as it rotates under the camera. This multi-dimensional analysis allows us to measure size, colour grades and skin imperfections at lightening speeds and perfect efficiency.

Our turn-key so ....etc

[:=Read Full Message Here=:]

THERMAL POWER PLANT
ACKOWLEDGEMET
I am highly grateful to the Mr. Sunil Kumar, HOD EE, IEC College of Engineering & Technology Gr. Noida, for providing this opportunity to carry out the four weeks industrial training at NATIONAL THERMAL POWER CORPORATION, DADRI
I express my sincere gratitude towards NATIONAL THERMAL POWER CORPORATION, DADRI for giving me an opportunity to undergo my summer training for 4 weeks. I also thanks to all the technicians, staffs for explaining all the practical aspects involved during my training.
....etc

[:=Read Full Message Here=:]

FABRICATION OF THREMOCOL DENSIFIER
FOR SAFE DISPOSAL OF WASTE
THERMOCOL BY HEAT TREATMENT PROCESS

Presented by
ARAVINDA K (4JC06ME006)
GANESH KUMAR HEBBAR S (4JC06ME011)
GURUDATH B (4JC06ME015)
KIRAN KUMAR M (4JC06ME021)

Under the guidance of

S SOMASHEKAR
Asst Professor
Dept of Mechanical Engg
SJCE, Mysore


Objective


Objective
To develop a comprehensive solution by fabricating a machine for the purpose of safe disposal of Waste Thermocol (Styrofoam) by reducing i ....etc

[:=Read Full Message Here=:]

INTRODUCTION

Mushrooms belong to the kingdom of Fungi, a group very distinct from plants, animals and bacteria. Fungi lack the most important feature of plants: the ability to use energy from the sun directly through Chlorophyll. Thus, fungi depend on other organisms for food, absorbing nutrients from the organic material in which they live. The living body of the fungus is mycelium made out of a tiny web of threads (or filaments) called hyphae. Under specific conditions, sexually compatible hyphae will fuse an ....etc

[:=Read Full Message Here=:]

Mushroom farming consists of six steps, and although the divisions are somewhat arbitrary, these steps identify what is needed to form a production system.
The six steps are Phase I composting, Phase II composting, spawning, casing, pinning, and cropping. These steps are described in their naturally occurring sequence, emphasizing the salient features within each step. Compost provides nutrients needed for mushrooms to grow. Two types of material are generally used for mushroom compost, the most used and least expensive being wheat straw-bedde ....etc

[:=Read Full Message Here=:]

Biscuit making business is very lucrative and can be initiated as small scale basis. Biscuit making is a conventional activity and an entrepreneur can initiate this business with low startup capital also. Despite the advent of modern, large capacity and automatic biscuit making plants, a large section of people still prefers fresh biscuits from the local bakery as they are cheap and offer many varieties. These manufacturers are able to cater to some typical local palate as well. Thus, they are able to withstand competition from organised sector ....etc

[:=Read Full Message Here=:]

FABRICATION OF THREMOCOL DENSIFIER
FOR SAFE DISPOSAL OF WASTE
THERMOCOL BY HEAT TREATMENT PROCESS

Presented by
ARAVINDA K (4JC06ME006)
GANESH KUMAR HEBBAR S (4JC06ME011)
GURUDATH B (4JC06ME015)
KIRAN KUMAR M (4JC06ME021)

Under the guidance of

S SOMASHEKAR
Asst Professor
Dept of Mechanical Engg
SJCE, Mysore


Objective


Objective
To develop a comprehensive solution by fabricating a machine for the purpose of safe disposal of Waste Thermocol (Styrofoam) by reducing i ....etc

[:=Read Full Message Here=:]

Polymer Processing


There are many processes for plastics. Selection of
a process depends on many factors including:
- Quantity and production rate
- Dimensional accuracy and surface finish
- Form and detail of the product
- Nature of material
- Size of final product
In general, plastics processes have three phases:
1. Heating - To soften or melt the plastic
2. Shaping / Forming - Under constraint of some kind
3. Cooling - So that it retains its shape

Thermoplastics sta ....etc

[:=Read Full Message Here=:]

FABRICATION OF THREMOCOL DENSIFIER
FOR SAFE DISPOSAL OF WASTE
THERMOCOL BY HEAT TREATMENT PROCESS

Presented by
ARAVINDA K (4JC06ME006)
GANESH KUMAR HEBBAR S (4JC06ME011)
GURUDATH B (4JC06ME015)
KIRAN KUMAR M (4JC06ME021)

Under the guidance of

S SOMASHEKAR
Asst Professor
Dept of Mechanical Engg
SJCE, Mysore


Objective


Objective
To develop a comprehensive solution by fabricating a machine for the purpose of safe disposal of Waste Thermocol (Styrofoam) by reducing i ....etc

[:=Read Full Message Here=:]

INTRODUCTION TO AMMONIA
__

Ammonia is one of the most important basic chemical of the world, ranking with materials such as sulfuric acid and sodium carbonate. In the fertilizer field, anhydrous ammonia itself has become the major supplier of the fertilizer nitrogen in India and it is also important inter mediate in production of more complex chemicals.
The major use of ammonia, both directly and indirectly, is as an intermediate in the fertilizer area. There are many other uses, although relatively minor, in ....etc

[:=Read Full Message Here=:]