Detection of corrosion damage in aircraft wing skin structures is an ongoing NDT challenge. Ultrasonic methods are known and well-accepted techniques, which are relatively simple to carry out in terms of setup, probes and instrumentation and operator training. However, with conventional inspection from the top surface using a transducer at normal incidence (0o to the normal to the surface) producing a visual picture in the form of a C-scan, it is very tie consuming to point-by-p ....etc

[:=Read Full Message Here=:]

INTRODUCTION
CAUSE OF CORROSION MOISTURE, WATER, CRACKS
AREAS AFFECTED SURFACE, LAP JOINTS, FASTENERS
3. NEED OF NDT
NON DESTRUCTIVE TESTS (NDT)
VISUAL INSPECTION
MAGNETIC PARTICLE TEST
LIQUID (DYE) PENITRATION TEST
X RAY PENETRATION INSPECTION
EDDY CURRENT INSPECTION
ULTRASONIC INSPECTION
DEFECTS OF CONVENTIONAL SYSTEMS
INSPECTION FROM TOP NORMAL TO SURFACE
2. TIME CONSUMING FOR POINT TO POINT INSPECTION
3. INABILITY TO DETECT (a) DISBONDS IN MULTILAYER
(b) FATIGUE CRACKS AT ....etc

[:=Read Full Message Here=:]

Topics

Abs Computers

Srno. Project Titles
1 Home Appliance Control From Remote System Voice Based
2 Payroll System RFID
3 Real Patient Monitoring System
4 Movie Bookie Using Smart Phone
5 Audio Steganography (No MATLAB)
6 Image Steganography (No MATLAB)
7 PC Based Graph Follower Robot
8 Voice Operated Car
9 SMS Based Railway Reservation System
10 J2ME Based Railway Reservation System
11 Attendance Management System
12 PCB Drilling System
13 Mega Travel Management System
14 Millions of Acres.com
15 Media Player in C#
16 ....etc

[:=Read Full Message Here=:]

BRANCH: COMPUTER SCIENCE AND ENGINEERING

CS 010 405- MICROPROCESSOR SYSTEMS (CS)

Part A

Answer all questions.

Each Question Carries 3 marks

1. What is microprocessor? Give the power supply and Clock frequency of 8085

2. Define instruction cycle, machine cycle and T-state

3. Explain the signals HOLD, READY and SID.

4. What is synchronous data transfer?

5. What is the use of modem control unit in 8251?

Part B

Answer all questions

Each question carries 5 marks

6. Compare CALL and PUSH instructions

7. Difference between memory mapped ....etc

[:=Read Full Message Here=:]

ABSTRACT

Detection of corrosion damage in aircraft wing skin structures is an ongoing NDT challenge. Ultrasonic methods are known and well-accepted techniques, which are relatively simple to carry out in terms of setup, probes and instrumentation and operator training. However, with conventional inspection from the top surface using a transducer at normal incidence (0o to the normal to the surface) producing a visual picture in the form of a C-scan, it is very tie consuming to point-by-point inspects large aircraft wing skin areas. I ....etc

[:=Read Full Message Here=:]

These are the various Network simulation Projects developed in OMNeT++ 3.2 which can be used for M.Tech, B.Tech and M.C.A students. On need of any project source code. Please Contact me.

1. Efficient Routing via Clustering using OMNeT (Type-A)

Basepaper: Efficient Node Search in P2P Using Distributed Spanning Tree ((IJCSIS) International Journal of Computer Science and Information Security,
Vol. 8, No. 3, June 2010)

Peer to Peer (P2P) networks are the important part of the next cohort of Internet, so how ....etc

[:=Read Full Message Here=:]

please go through the following thread for more details on 'ultrasonic tech for hidden corrosion detection'

http://seminarsprojects.net/Thread-ultra-sonic-techniques-for-the-detection-of-hidden-corrosion-in-air-craft-wing-skin ....etc

[:=Read Full Message Here=:]

Abstract
Corrosion is one of the serious problem affecting airforce and other aviation industries. It affects the aircraft on its wings, surface, between joints and fasteners. The presences of corrosion underneath the paints of surface and between joints are not easy to be detected. The unnoticed presence of corrosion may cause the aircraft to crash leading to human and money loses.

To detect the corrosion present on the metal surface, various methods and tests are used. These tests conducted should be such that it does not destroy or disassem ....etc

[:=Read Full Message Here=:]

Ultrasonic Techniques for hidden corrosion detection
Introduction
Corrosion is one of the serious problem affecting airforce and other aviation industries. It affects the aircraft on its wings, surface, between joints and fasteners. The presences of corrosion underneath the paints of surface and between joints are not easy to be detected. The unnoticed presence of corrosion may cause the aircraft to crash leading to human and money loses. To detect the corrosion present on the metal surface, various method ....etc

[:=Read Full Message Here=:]

Hi.. Here you can find the topics of latest IEE Network Simulation Projects implemented in tool OMNeT++ 3.2.

1. Minimum Distance Packet Forwarding

This IEE Journal Technology Simulation Project is the simulation of Minimum Distance Packet Forwarding for search application in Network (P2P) using OMNeT++ 3.2 tool. This technique is based on technique published on IEE Transaction paper.

2. Endpoint Admission Control

This IEE Journal Technology Simulation Project is the simulation of Probing Mechanism for Endpoint Admission Control in ....etc

[:=Read Full Message Here=:]