Advantages of inflatable wings

High aspect ratio
High durability
We can change the value of CL
Can be packed and deployed numerous times
Wing can recover shape in flight even if the load limit is exceeded
Impact absorption and impact resiliency


Applications
Military applications
1.border patrol
2. surveillance and inspection.
Commercial applications
1. airborne observation of crops
2. inspection of pipelines and power lines.
3.mapping of particular area
Space research


....etc

[:=Read Full Message Here=:]

To get full information or details of wing fabrication of aircraft please have a look on the pages

http://seminarsprojects.net/Thread-aircraft-auto-pilot-roll-controll-system?pid=26674&mode=threaded

if you again feel trouble on wing fabrication of aircraft please reply in that page and ask specific fields in wing fabrication of aircraft ....etc

[:=Read Full Message Here=:]

Detection of corrosion damage in aircraft wing skin structures is an ongoing NDT challenge. Ultrasonic methods are known and well-accepted techniques, which are relatively simple to carry out in terms of setup, probes and instrumentation and operator training. However, with conventional inspection from the top surface using a transducer at normal incidence (0o to the normal to the surface) producing a visual picture in the form of a C-scan, it is very tie consuming to point-by-p ....etc

[:=Read Full Message Here=:]

why is it that variable wing geometry aircraft do not exist anymore ....etc

[:=Read Full Message Here=:]

ABSTRACT

Detection of corrosion damage in aircraft wing skin structures is an ongoing NDT challenge. Ultrasonic methods are known and well-accepted techniques, which are relatively simple to carry out in terms of setup, probes and instrumentation and operator training. However, with conventional inspection from the top surface using a transducer at normal incidence (0o to the normal to the surface) producing a visual picture in the form of a C-scan, it is very tie consuming to point-by-point inspects large aircraft wing skin areas. I ....etc

[:=Read Full Message Here=:]

Abstract
Corrosion is one of the serious problem affecting airforce and other aviation industries. It affects the aircraft on its wings, surface, between joints and fasteners. The presences of corrosion underneath the paints of surface and between joints are not easy to be detected. The unnoticed presence of corrosion may cause the aircraft to crash leading to human and money loses.

To detect the corrosion present on the metal surface, various methods and tests are used. These tests conducted should be such that it does not destroy or disassem ....etc

[:=Read Full Message Here=:]

Ultrasonic Techniques for hidden corrosion detection
Introduction
Corrosion is one of the serious problem affecting airforce and other aviation industries. It affects the aircraft on its wings, surface, between joints and fasteners. The presences of corrosion underneath the paints of surface and between joints are not easy to be detected. The unnoticed presence of corrosion may cause the aircraft to crash leading to human and money loses. To detect the corrosion present on the metal surface, various method ....etc

[:=Read Full Message Here=:]

Morphing Aircraft Technology
&
New Shapes For Aircraft Design
V.Vikram
S6 Department of Mechanical Engineering
Mohandas college of Engineering and Technology



Abstract
Morphing aircraft are multi-role aircraft that change their external shape substantially to adapt to a changing
mission environment during flight.2 This creates superior system capabilities not possible without morphing shape
changes. The objective of morphing activities is to develop hig ....etc

[:=Read Full Message Here=:]

INTRODUCTION
CAUSE OF CORROSION MOISTURE, WATER, CRACKS
AREAS AFFECTED SURFACE, LAP JOINTS, FASTENERS
3. NEED OF NDT
NON DESTRUCTIVE TESTS (NDT)
VISUAL INSPECTION
MAGNETIC PARTICLE TEST
LIQUID (DYE) PENITRATION TEST
X RAY PENETRATION INSPECTION
EDDY CURRENT INSPECTION
ULTRASONIC INSPECTION
DEFECTS OF CONVENTIONAL SYSTEMS
INSPECTION FROM TOP NORMAL TO SURFACE
2. TIME CONSUMING FOR POINT TO POINT INSPECTION
3. INABILITY TO DETECT (a) DISBONDS IN MULTILAYER
(b) FATIGUE CRACKS AT ....etc

[:=Read Full Message Here=:]

please go through the following thread for more details on 'ultrasonic tech for hidden corrosion detection'

http://seminarsprojects.net/Thread-ultra-sonic-techniques-for-the-detection-of-hidden-corrosion-in-air-craft-wing-skin ....etc

[:=Read Full Message Here=:]