Abstract:

A digital audio broadcasting system that is capable of providing a large number of high quality stereophonic channels to mobile receivers in an environment with severe multipath delay and fading. Optimum combination of frequency and time diversity to guarantee robust performance in the mobile channel, with its multipath delay and frequency-selective fading effects. The system is based upon a dynamic single channel per carrier assignment of each stereo channel to many carriers. Inter symbol interference degradations caused by multipat ....etc

[:=Read Full Message Here=:]

Abstract

The project is designed as a security system based on photo sensing arrangement. It uses a 14- stage ripple carry binary counter to sense the light intensity through LDR. The output drives a buzzer and a relay for necessary action. This concept is very useful to deter burglars from banks, malls, jewellery stores and also in homes. The system is based on an electronic eye: it is an LDR sensor, called light dependant resistor. When light falls on the sensor, its resistance drastically decreases which lead to triggering an alarm to al ....etc

[:=Read Full Message Here=:]

Mini Mic Pre-Amplifier Circuit based IC LM358



Simple Audio Pre-Amp circuit
Designed based on single Transistor 2N3904, this circuit will provide good gain for weak audio signals such as electret microphone. Easy to build and really simple for pre-amp circuit

Condenser Mic preamplifier
This is a very simple preamplifier circuit for condenser microphone. This mic preamplifier also can be used for dynamic microphone.

You can replace the BC549 with BC109C. For bette ....etc

[:=Read Full Message Here=:]

Circuit of an automatic switch for audio power amplifier stage is presented here. The circuit uses stereo
preamplifier output to detect the presence of audio to switch the audio power amplifier on only when
audio is present. The circuit thus helps curtail power wastage. IC1 is used as an inverting adder. The
input signals from left and right channels are combined to form a common signal for IC2, which is used
as an open loop comparator. IC3 (NE556) is a dual timer. Its second section, i.e., IC3(b), is configured
as mono ....etc

[:=Read Full Message Here=:]

to get information about the topic intelligent traffic control system related topic refer the page link bellow

http://seminarsprojects.net/Thread-intelligent-ambulance-for-city-traffic-and-gsm-to-sent-the-status-of-the-patient-to-t

http://seminarsprojects.net/Thread-intelligent-ambulance-for-city-traffic-and-gsm-to-sent-the-status-of-the-patient-to-t?page=4 ....etc

[:=Read Full Message Here=:]

power amplifier circuit diagram



Circuit Description
There are many instances where a simple and reliable power amplifier is needed - rear and centre channel speakers for surround-sound, beefing up the PC speakers, low powered tweeter amplifier, etc. For those who want to build their own 'Gainclone' amplifier, this will certainly do the job :-)
This project (unlike most of the others, but in a similar vein to Project 19) is based almost directly on the typical application ci ....etc

[:=Read Full Message Here=:]

to get information about the topic digital audio s final frontier class d amplifier full report ppt and related topic refer the page link bellow

http://seminarsprojects.net/Thread-digital-audio-s-final-frontier-class-d-amplifier--2028

http://seminarsprojects.net/Thread-class-d-amplifiers ....etc

[:=Read Full Message Here=:]

Audio Amplifier Circuit



In the first part of lab#1 you will construct a low-power audio amplifier/speaker driver based
on the LM386 IC from National Semiconductor. The audio amplifier will be a selfcontained, battery-operated component. In the second part of the lab you will construct a
microphone circuit using a compact electret condenser microphone cartridge. These circuit
modules are important building blocks of many audio communications systems, and will be
used in our ultrasonic transceiver system. ....etc

[:=Read Full Message Here=:]

Digital Audio's Final Frontier-Class D Amplifier

Digital technology continues its march from media like CDs and DVDs toward your audio speakers. Today, amplifiers based on digital principles are already having a profound effect on equipment efficiency and size. They are also beginning to set the standard for sound quality.

An old idea, the Class D amplifier has taken on new life as equipment manufacturers and consumers redefine the musical experience to be as likely to occur in a car, on a personal stereo, or on an a ....etc

[:=Read Full Message Here=:]

In the output stages of most broadcastreceivers and some amplifiers,there is a limit up to which maximumpower can be developed withoutdistortion. In the widely acceptedoutput circuit, two output transistorsare connected in series between thepositive and ground and biasing is adjustedso that each transistor gets halfthe supply voltage.The circuit presented here is asimple audio amplifier for a personalstereo system. In this, supply voltageto each transistor can be enhanced toproduce a larger output. The audiodriver transformer drives the transis ....etc

[:=Read Full Message Here=:]