Chapter 1: Introduction
Note: This chapter is expected to lay the foundation for the project
1.0 Introduction
1.1 Background of Study :
Provides a brief idea of the subject matter
1.2 Statement of the problem
1.3 Objective of the study
Provides specific goals expected to be achieved. It must clear and unambiguous so that when such objectives are attained. We can say effort is successful
1.4 Significant of Study : State why the project is a topical one demanding projet effort. The likely consequences if nothing is done or if recommenda ....etc

[:=Read Full Message Here=:]

Good day,pls I will like to have a note/write up on Expert system for troubleshooting a fault in a transmitter. Thanks in anticipation ....etc

[:=Read Full Message Here=:]

ABSTRACT

An expert system for personal computer troubleshooting, developed as part of MCA 6th semester Course project work, National Institute of Technology, Calicut, is presented. It is implemented on a personal computer. The proposed system includes many characteristics of an expert system because it can be expanded easily by adding new information to its knowledge base or by changing its existing information. The basic idea behind this expert system is to provide a non-expert with the necessary information and interaction ....etc

[:=Read Full Message Here=:]

Troubleshooting Antilock Braking

Use your trusty multimeter to check continuity through wheel speed sensors.
This sensor has a value of about 1.5 K ohms.

By Mike Allen
Photography by James Westman
Published in the February 2006 issue.

Over the river and through the woods was more dangerous back when cars had crummy bias-ply tires, rear-wheel drive and ordinary brakes. So, tonight you feel confident driving home through several inches of freshly fallen snow after a sumptuous holiday dinner. Your front-drive car has excellent all-seas ....etc

[:=Read Full Message Here=:]

Troubleshooting is a form of problem solving, often applied to repair failed products or processes. It is a logical, systematic search for the source of a problem in order to solve it, and make the product or process operational again. Troubleshooting is needed to identify the symptoms. Determining the most likely cause is a process of elimination eliminating potential causes of a problem. Finally, troubleshooting requires confirmation that the solution restores the product or process to its working state.

In general, troubleshooting is the ....etc

[:=Read Full Message Here=:]

Cannot build flight catering facility. Msg says I have to many buildings of the same the same type! Please help! Thank you so much! ....etc

[:=Read Full Message Here=:]

Ihave two inverters of sukam 100w but they are trouble shooting in two inverters. They are connected two batterys of 12v and 7.2 ah . They charging cooreectly
But when power is gone they are low battery showing
We connect one cfl of 15 watts , but same problam.I change many battery but there are same problam.how I can solve the problam ....etc

[:=Read Full Message Here=:]

NetworkCard troubleshooting Steps


Try Restore if it was working fine earlier

If it s Integrated Ethernet card then verify it is Enabled in BIOS

Uninstall and Reinstall Network drivers

Ping Local Host( 127.0.0.1 or you can get the IP address by
typing ipconfig /all at the command prompt )

Check the connectivity lights behind the system box

Run Diags on the Network card and ensure card s functionality

Solution for Windows XP/2000 Network cable unplugged

1. ....etc

[:=Read Full Message Here=:]

Abstract:
The keys to successful motor operation include a total understanding of the application, then choosing the proper type of motor for the application. This must then be followed by the proper installation mounting, coupling, and a total understanding of the motor surroundings or environment. Of course, for continued success proper maintenance of the motor must also be performed. Many problems could be avoided if the application and environment were understood, while others may be caused by a changing e ....etc

[:=Read Full Message Here=:]

Prepared by:
Ron Hranac


Digitally Modulated Carrier Amplitude


When measuring the amplitude of a digitally modulated carrier, make certain you are measuring its average power level

Use test equipment that performs automated measurements, rather than trying to make error-prone manual measurements that require bandwidth, IF filter, log amplifier and detection corrections


for more details, please visit
http://downloads.net1.cc/Other%20stuff/CaTV%20docs/Downstream%20RF%20Troublshooting.pdf ....etc

[:=Read Full Message Here=:]