I would line to know the correct procedure about how to do Chemical earthing, including dimensions and connecting earth lead to plate. ....etc

[:=Read Full Message Here=:]

I am looking for pipe earthing/lighning protection procedure for my hilltop house. Please advise ....etc

[:=Read Full Message Here=:]

Bentonite is a moisture retaining clay used as an earth electrode back-fill to help lower soil resistivity. The Bentonite clay is a sodium activated montmorillonite which when mixed with water swells to many times its original volume. If underground power cables are required to run at maximum direct burial rating when installed in cable duct, then the cable duct should be filled with Bentonite mixture (100 parts of 10:1 Bentonite / water mix to 20 parts sand and 8 parts cement). The Bentonite mixture should be pumped into the cable duct so tot ....etc

[:=Read Full Message Here=:]

sir i want earthing transformer for power system ppt ....etc

[:=Read Full Message Here=:]

PRESENTATIONOFEarthing System
abstract

In electricity supply systems, an earthing system defines the electrical potential of the conductors relative to that of the Earth's conductive surface. The choice of earthing system has implications for the safety and electromagnetic compatibility of the power supply. Note that regulations for earthing (grounding) systems vary considerably among different countries.

A protective earth (PE) connection ensures that all exposed conductive surfaces are at the same elec ....etc

[:=Read Full Message Here=:]

What is the use of earthing?
Earthing is used to protect you from an electric shock. It does this by providing a path (a protective conductor) for a fault current to flow to earth. It also causes the protective device (either a circuit-breaker or fuse) to switch off the electric current to the circuit that has the fault.
What is earth pits?
Length of Pipe Electrode and Earthing Pit. The resistance to earth of a pipe or plate electrode reduces rapidly within the first few feet from ground (mostly 2 to 3 meter) but after that soil resistivity ....etc

[:=Read Full Message Here=:]

INTRODUCTION
The meaning of the term earthing or grounding is to connect the electrical equipment to the general mass of earth by wire of negligible resistance. This brings the body of the electrical equipment to Zero potential and thus will avoid the shock to the operator. The neutral of the supply system is also solidly earthed to ensure its potential equal to Zero according to Indian Electricity Eale,[?The earthed or connected with earth means connected with the general mass of the earth in such manner as to sure at ....etc

[:=Read Full Message Here=:]

earthing pit calculation free download in pdf
earthing pit calculation free download in pdf ....etc

[:=Read Full Message Here=:]

Introduction

What is Earthing

-The process of earthing is to connect all the objects which could become charged to the general mass of the earth, to provide a path for electrical current and to hold the parts as close as possible to earth potential.
-For tying the electrical supply system to earth, supply transformer neutral conductor (Y point of 3 phase Supply) is connected to earth using an earthing electrode or the metal sheath and armouring of a buried conductor.

Why Earthing required[/ ....etc

[:=Read Full Message Here=:]

To get full information or details of types of earthing systems in sub station please have a look on the pages

http://seminarsprojects.net/Thread-gas-insulated-substation-full-report?pid=66067

if you again feel trouble on types of earthing systems in sub station please reply in that page and ask specific fields in types of earthing systems in sub station ....etc

[:=Read Full Message Here=:]