i want closed loop servo motor using 8051 micro controller (EE2354) .i need 16 mark brief explanation about this question. ....etc

[:=Read Full Message Here=:]

Closed loop timing



Bundled closed loop timing

Signal AD and ref signal Aclk transition tncq after each transition on Tclk
Vector BD and reference Bclk transition tnAB later.
Timing loop locks the quadrature clock Qclk to Bclk with offset lag equal to aperture offset ta0 of phase detector of flip-flop
This places the receive clock, Rclk which is offset from Qclk by /2
Aperture is exactly centred on the eye of data vector BD.

Which of these elements of timing uncertainty are cancelled?

Al ....etc

[:=Read Full Message Here=:]

to get information about the topicmicro controller based dc motor speed controllerrefer the page link bellow

http://seminarsprojects.net/Thread-microcontroller-based-dc-motor-speed-controller ....etc

[:=Read Full Message Here=:]

This article describes a DDR SDRAM (Double Data Rate Synchronously
Dynamic RAM) controller. The commands of the FPGA-based DDR
SDRAM controller is described in detail. The Verilog HDL is used to implement the R/W operation of the DDR SDRAM. This controler isused to control a 400MHz single channel high-speed, high-precision and large-capacity data acquisition board.

Introduction
The speed and precision of data acquisition system must be sufficiently high to meet the requirements of advanced communication technology development. hi ....etc

[:=Read Full Message Here=:]

Open loop control vs. closed loop (feedback) control



The next two figures present the structures of open loop and feedback control systems.
Figure 1 shows an open loop control system whose function is to cause the output y(t) to follow the
reference r(t).
Feedback control system design for zero steady state error
In general, to follow a reference R(s) with zero steady-state error, the path between the
reference and the system output should contain a term like R(s). For instance, to follow a ramp
(velocity) ....etc

[:=Read Full Message Here=:]

An industrial plant has hundreds or even thousands of control loops. The performance of control loops is important to ensure high product quality and low cost of the product in such plants. In general, oscillatory variables are one of the main causes for poor performance of control loops. Therefore, detection and diagnosis of the causes of oscillations in control loops is very vital for maintaining the product within the desired quality limits. Identification of such source signatures is a very important task in assessing closed loop control pe ....etc

[:=Read Full Message Here=:]

urgent msg:: tomo i have seminar on closed loop control of servo motor using 8051 microcontroller.pls give me notes to teach. ....etc

[:=Read Full Message Here=:]

To get full information or details of closed loop boost converter please have a look on the pages

http://seminarsprojects.net/Thread-closed-loop-control-methods-for-interleaved-dcm-ccm-boundary-boost-pfc-converters

if you again feel trouble on closed loop boost converterplease reply in that page and ask specific fields in closed loop boost converter ....etc

[:=Read Full Message Here=:]

Abstract

In this study, we propose some simple but effective throughput-approximation methods for finite-buffered closed-loop production systems with unreliable machines and exponentially distributed processing times. The proposed approximation methods are based on decomposition and aggregation principles. According to the method representing the decomposed systems, three different approximation methods are developed, along with a simple upper bounding method for throughputs. Extensive computational experiments are perform ....etc

[:=Read Full Message Here=:]

applications of microcontroller based automatic door open and closed system using ir sensor pdf

This is a good Electronics Project report on Automatic Door Opening System Using IR Sensors which is used to automate door opening. Some of the main component required for this project are Power supply, ATMEL (AT89S52)Microcontroller, Stepper Motor & IR sensors. This report start with the introduction to embedded systems. In this system whenever the infrared sensor senses the obstacle and the signal is sent to the microcontroller. Then the microcont ....etc

[:=Read Full Message Here=:]