future scope on magneto optical current transformer pdf

The MOCT measures the electric current by means of Faraday Effect, which was first observed by Michael Faraday 150 years ago. The Faraday Effect is the phenomenon that the orientation of polarized light rotates under the influence of the magnetic fields and the rotation angle is proportional to the strength of the magnetic field component in the direction of optical path.

The MOCT measures the rotation angle caused by the magnetic field and converts it into a signal of few volts proporti ....etc

[:=Read Full Message Here=:]

Passive Magnetic Bearing: Design Becomes Reality



The collaboration between Lawrence Livermore National Laboratory ( LLNL ) and Arnold Magnetic Technologies ( Arnold ) began with a theoretical design developed by Dr. Dick Post of LLNL, and became a reality through the manufacturing expertise of Arnold. For the past several months, Arnold and LLNL collaborated on designing, building, and testing a prototype passive magnetic bearing system. The objective of the Arnold / LLNL relationship was to prove Dr. Post s ....etc

[:=Read Full Message Here=:]

DESIGN AND FABRICATION OF FREE MAGNETO ENERGY SYSTEM
PROJECT MEMBERS:
MOHAMMED AZHAR.M
SYED GHOUSE BASHA.A
VINOTH KUMAR.V
VINOTH.K

GUIDE BY
Mr.PRASATH M.E
ABSTRACT
The Free magneto energy system is totally based on energy conversion method.
The magnetic energy is used to generate the electric power.
This is used to emergency power system.
Ultimate aim of our project is to produce electric energy with out emission and pollusion.

APPLICATION:
The free magneto energy system is used ....etc

[:=Read Full Message Here=:]

Innovative Designs for Magneto-Rheological Dampers



Introduction
The main purpose of this chapter is to introduce the topic of magneto-rheological
(MR) dampers to the reader. Also presented is an explanation of the mechanism
through which MR fluid works. Lastly, the project objectives and the approach
taken to evaluate different MR damper designs are discussed.

1.1 An Overview of Magneto-Rheological Dampers
In recent years, manufacturers have shown an increased inte ....etc

[:=Read Full Message Here=:]

please tell us the disadvantages of magneto rheological suspension or please tell us if any modification can be made to improve its effeincy ....etc

[:=Read Full Message Here=:]

Design and manufacture of White Metal Thrust Bearing

Abstract of the project :
White metal bearings transmit the thrust exerted by shafts rotating at high speeds to the foundation of the machine. White metal thrust bearings were invented by Anthony Michell in 1905. Here, pads are used instead of rollers or balls and the bearing housing is flooded with a hydrodynamic fluid under pressures of about 100 bar in order to minimize frictional losses. This also results in an increased load bearing cap ....etc

[:=Read Full Message Here=:]

To get full information or details of fabrication of pneumatic bearing puller pdf download please have a look on the pages

http://seminarsprojects.net/Thread-pneumatic-bearing-puller

if you again feel trouble on fabrication of pneumatic bearing puller pdf download please reply in that page and ask specific fields in fabrication of pneumatic bearing puller pdf download ....etc

[:=Read Full Message Here=:]

download the ppt on design and fabrication of tyre coupling pdf

ABSTRACT

Mild steel or wrought iron shaft are available in lengths varying from 6 to 10 meters, so as to make them handy and easy to transport. More lengthy shafts cannot be manufactured in a correct form to be used for power transmission. In engineering practice shafts of large lengths are required to transmit the torque which can be obtained by joining two or more shafts in order to obtain the required length. The joining of shafts is done by device is called as coupling.Tyre c ....etc

[:=Read Full Message Here=:]

DESIGN, IMPROVEMENT AND THRUST BEARING ANALYSIS OF OIL EXPELLER MACHINE


Introduction to Processing of mustard-rapeseed
Oilseed processing

Various small-scale techniques are available to process oilseeds locally. Careful
consideration is needed to select the system that will best suit the local
circumstances. These circumstances include the scale of operation required, the
availability of a power source, and a number of other factors.

Raw material preparation

Oilseeds and nuts should be properly dried before ....etc

[:=Read Full Message Here=:]

magneto optical current transformer installed in india

An accurate electric current transducer is a key component of any power system instrumentation. To measure currents, power stations and substations conventionally employ inductive type current transformers with core and windings. For high voltage applications, porcelain insulators and oil-impregnated materials have to be used to produce insulation between the primary bus and the secondary windings.

The insulation structure has to be designed carefully to avoid electric field stresses, whi ....etc

[:=Read Full Message Here=:]